Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GOLITE 140 XLW C&G
- Product Form
- Refractory castable
- Chemical Name
- Perlite, Aluminium oxide
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial refractory application
Uses advised against
No information available
Manufacturers & Suppliers
Gouda Refractories
manufacturer
Goudkade 21, 2802 AA Gouda, The Netherlands
+31(0)182591400
Emergency Contacts
NVIC
+31887558000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alumina cement | 65997-16-2 | 40% | No |
| Aluminum oxide | 1344-28-1 | 40% | No |
| Alumina silicate | 12141-46-7 | 10% | No |
| Amorphous silica | 69012-64-2 | 25% | No |
| Spheres | 93924-19-7 | 20% | No |
| Perlite | 93763-70-3 | 50% | No |
This product does not contain candidate substances of very high concern at concentration >= 0.1 (regulation (EC) No. 1272/2008 (REACH), Article 59).
Notes
This product does not contain candidate substances of very high concern at concentration >= 0.1 (regulation (EC) No. 1272/2008 (REACH), Article 59).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh and dust free area
Wash skin with soap and water. In the case of skin irritation or allergic reactions see a doctor.
Symptoms: Mild skin irritant
Rinse thoroughly with plenty water for at least 15 minutes, lifting lower and upper eye lids. Consult a doctor.
Symptoms: Mild eye irritant
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
None known. Not flammable.
Firefighter Protection
As in any fire, fire fighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid generation of dust. Do not breathe dust.
No special environmental precautions required. See section 12 for additional Ecological information.
Sweep up and shovel into suitable containers for disposal. Pick up and transfer to properly labelled containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid generation of dust. Ensure adequate ventilation.
Keep in a dry place end ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No information available.
Protective suitable gloves are recommended.
Eye protection must conform to standard EN166. Safety glasses with side-shields or goggles to prevent dust and particles from entering the eyes.
No protective equipment is needed under normal conditions. If exposure limits are exceeded or irritation is experiences, ventilation and evacuation may be required.
No special protective equipment required.
Avoid dust formation. No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
None under normal processing
None under normal processing. Hazardous polymerisation: None under normal processing
Dust formation. Avoid generation dust. See also part 7 of the MSDS
None under normal processing
None under normal processing
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Material can be recycled or disposed according to local regulations. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Material can be recycled or disposed according to local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GOLITE 140 XLW C&G?
The signal word is no signal word.
What is the physical form of GOLITE 140 XLW C&G?
GOLITE 140 XLW C&G is a solid appearing as dry, white powder with white color.
What is the solubility of GOLITE 140 XLW C&G?
Slightly soluble
What is GOLITE 140 XLW C&G used for?
Industrial refractory application
What is the melting point of GOLITE 140 XLW C&G?
The melting point is 1500 [°C] and the boiling point is No data available.