Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
HOUGHTO-CLEAN 400 commonly used cleaning product, solvent based.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS08
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H304: May be fatal if swallowed and enters airways.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H413: May cause long lasting harmful effects to aquatic life.
Precautionary Statements
- P280: Wear protective gloves. Wear eye or face protection.
- P273: Avoid release to the environment.
- P261: Avoid breathing vapor.
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor.
- P331: Do NOT induce vomiting.
- P362+P364: Take off contaminated clothing and wash it before reuse.
- P302+P352: IF ON SKIN: Wash with plenty of water.
- P333+P313: If skin irritation or rash occurs: Get medical advice or attention.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice or attention.
- P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Quaker Houghton BV
undefined
Industrieweg 7, 1422 AH Uithoorn The Netherlands
NL
+31 (0) 297 544644
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC Netherlands
+(31)-858880596
NL
National Poisons Information Center (NL)
+31 30 274 88 88
NL
NB: this service is only available to health professionals
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
Product containing mineral oil with less than 3% DMSO extract as measured by IP 346.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C16-C20, n-alkanes, isoalkanes, cyclics, aromatics (2-30 %) EC: 919-006-8 | 64742-80-9 | 50-75% | ⚠️ Hazardous |
| Distillates (petroleum), hydrotreated light EC: 926-141-6 | N/A | 10-25% | ⚠️ Hazardous |
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 10-25% | ⚠️ Hazardous |
| Sulfonic acids, petroleum, sodium salts EC: 271-781-5 | 68608-26-4 | 3% | ⚠️ Hazardous |
| Tall Oil Fatty Acids, compounds with 2(2-aminoethoxy) ethanol EC: 946-398-8 | N/A | 2.5% | ⚠️ Hazardous |
| Mineral oil | N/A | 3% | ✓ Non-hazardous |
Composition Notes
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of equivalent concern, or have been assigned a workplace exposure limit and hence require reporting in this section.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Get medical attention immediately. Move affected person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Aspiration hazard if swallowed. Can enter lungs and cause damage.
Symptoms:
Not expected under normal use.
🖐️ Skin Contact
Wash with plenty of soap and water. Remove contaminated clothing and wash it before reuse. Get medical attention if symptoms occur.
Symptoms:
irritation,redness,Defatting to the skin.,dryness,cracking,skin rash or hives
👁️ Eye Contact
Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Remove contact lenses, if present and easy to do. Get medical attention if symptoms occur.
Symptoms:
pain or irritation,redness,watering
🍽️ Ingestion/Swallowing
Aspiration hazard if swallowed. Can enter lungs and cause damage. Ingestion may cause gastrointestinal irritation and diarrhea. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.
Symptoms:
nausea or vomiting
🚨 Immediate Medical Attention Required
Treat symptomatically.
Medical Treatment
No specific treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
If user operations generate dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. Engineering controls should be considered as the first line of protection against adverse exposure to harmful substances. Administrative controls and PPE should be used in the absence of engineering controls or as supplemental controls where engineering controls are insufficient in reducing specific exposures to an acceptable level
🧤 Hand Protection
The following glove type may be suitable for handling this product Protective gloves complying with EN374 nitrile rubber Glove Thickness : 0.38 mm Break through time : 480 minutes butyl rubber Glove Thickness : 0.64 mm Break through time : 480 minutes The user must check that the final choice of type of glove selected for handling this product is the most appropriate and takes into account the particular conditions of use, as included in the user's risk assessment. The instructions and information provided by the glove manufacturer on use, storage, maintenance and replacement must be followed. Always ensure that gloves are free from defects and that they are stored and used correctly. Barrier creams may help to protect the exposed areas of the skin but should not be applied once exposure has occurred.
👁️ Eye Protection
Use eye protection according to EN 166, designed to protect against liquid splashes. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with sideshields
😷 Respiratory Protection
No personal respiratory protective equipment normally required. In case of inadequate ventilation wear respiratory protection. If heated and ventilation is inadequate, use respirator which will protect against organic vapor and dust/mist. Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification.
🦺 Skin/Body Protection
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Wear work clothing with long sleeves.
🌍 Environmental Exposure Controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for HOUGHTO-CLEAN 400?
The signal word for this substance is "danger".
What is the physical form of HOUGHTO-CLEAN 400?
HOUGHTO-CLEAN 400 is a liquid. with clear. dark amber. color. It has solvent odor.
What is the solubility of HOUGHTO-CLEAN 400?
Emulsifies.
What is HOUGHTO-CLEAN 400 used for?
Cleaning product, solvent based
What are the hazard statements for HOUGHTO-CLEAN 400?
This substance has 4 hazard statements: H304: May be fatal if swallowed and enters airways. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H413: May cause long lasting harmful effects to aquatic life.
What is the melting point of HOUGHTO-CLEAN 400?
The melting point is <0C and the boiling point is >180C.