Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
LCL 30.1 commonly used coolant.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H373: May cause damage to organs through prolonged or repeated exposure.
Precautionary Statements
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P270: Do not eat, drink or smoke when using this product.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
- P314: Get medical advice/attention if you feel unwell.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Lorch Schweisstechnik GmbH
manufacturer
Im Anwnder 24-26 D-71549 Auenwald-Mittelbrden
DE
+49 7191.503.0
+49 7191.503.199
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
GIZ-Nord
+49(0) 551 - 1 92 40
DE
24h
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture of water, ethyleneglycol, alcohols and inhibitors.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanediol, ethylene glycol EC: 203-473-3 | 107-21-1 | 35-45% | ⚠️ Hazardous |
| propan-1-ol; n-propanol EC: 200-746-9 | 71-23-8 | 2-4% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Provide fresh air.
🖐️ Skin Contact
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately.
👁️ Eye Contact
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
🍽️ Ingestion/Swallowing
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting.
🚨 Immediate Medical Attention Required
First Aid, decontamination, treatment of symptoms.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide adequate ventilation as well as local exhaustion at critical locations. Work in well-ventilated zones or use proper respiratory protection. Ground and bond container and receiving equipment. Carry out filling operations only at stations with exhaust ventilation facilities.
🧤 Hand Protection
Tested protective gloves must be worn: DIN EN 374 NBR (Nitrile rubber) NR (natural rubber, natural latex) Butyl caoutchouc (butyl rubber) Thickness of the glove material >= 0,4 mm Breakthrough times and swelling properties of the material must be taken into consideration. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wearing time with occasional contact (splashes): max. 480 min. (NBR (Nitrile rubber)) Wearing time with permanent contact 240 - 480 min (NBR (Nitrile rubber)) Observe the wear time limits as specified by the manufacturer. Wear cotton undermitten if possible.
👁️ Eye Protection
Eye glasses with side protection, goggles
😷 Respiratory Protection
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140) ABEK-P3
🦺 Skin/Body Protection
Wear anti-static footwear and clothing Street clothing should be stored separately from work clothing. Take off immediately all contaminated clothing and wash it before reuse.
🌍 Environmental Exposure Controls
No information available.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for LCL 30.1?
The signal word for this substance is "warning".
What is the physical form of LCL 30.1?
LCL 30.1 is a liquid with colourless color. It has characteristic odor.
What is the solubility of LCL 30.1?
No information available.
What is LCL 30.1 used for?
Coolant
What are the hazard statements for LCL 30.1?
This substance has 3 hazard statements: H302: Harmful if swallowed. H319: Causes serious eye irritation. H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of LCL 30.1?
The melting point is not determined and the boiling point is ~ 100 C.