NextSDS Logo
Po

Pour-Pac MP-55 Part B

WARNING liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Pour-Pac MP-55 Part B
Product Code
20 (Black), 94 (Gray), 7 (Natural), 43 (Orange)

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Two-component adhesive for attaching sensors to the road surface

Overview

Pour-Pac MP-55 Part B commonly used two-component adhesive for attaching sensors to the road surface.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (Warning)

Hazard Classifications

Skin Sens. Category 1 H317
Acute Tox. Category 4 H302
Aquatic Acute Category 1 H400
Aquatic Chronic Category 1 H410

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H302: Harmful if swallowed
  • H317: May cause an allergic skin reaction
  • H410: Very toxic to aquatic life with long lasting effects

Precautionary Statements

  • P264: Wash hands thoroughly after handling.
  • P270: Do not eat, drink or smoke when using this product.
  • P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
  • P272: Contaminated work clothing should not be allowed out of the workplace.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P273: Avoid release to the environment.
  • P301+P312: IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell.
  • P330: Rinse mouth.
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P321: Specific treatment (see first aid instructions on this label).
  • P362+P364: Take off contaminated clothing and wash it before reuse.
  • P391: Collect spillage.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Vaisala Oyj company logo - Safety Data Sheet supplier organization

Vaisala Oyj

distributor

๐Ÿ“

Vanha Nurmijrventie 21 01670 Vantaa, Finland

๐ŸŒ

FI

๐ŸŒ www.vaisala.com
Vaisala LTD company logo - Safety Data Sheet supplier organization

Vaisala LTD

distributor

๐Ÿ“

6230 Bishops Court Solihull Parkway Birmingham Business Park B37 7YB, United Kingdom

๐ŸŒ

GB

๐Ÿ“ž

+44(0) 121 6831269

๐ŸŒ www.vaisala.com

Fabick Inc.

manufacturer

๐Ÿ“

4118 Robertson Road Madison, WI 53714, USA

๐ŸŒ

US

๐Ÿ“ž

608-242-1100

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

999

๐ŸŒ

GB

๐Ÿ’ก

In an emergency, if the patient has collapsed or is not breathing properly

NHS 111

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ’ก

in England

NHS 24

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ’ก

in Scotland

NHS Direct

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ’ก

in Wales

NHS Direct

๐Ÿ“ž

0845 4647

๐ŸŒ

GB

๐Ÿ’ก

in Wales

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
4-methyl-2,6-bis(methylthio)1,3-benzenediamine
EC: 676-681-9
102093-68-5 10-20% โš ๏ธ Hazardous
2-methyl-4,6-bis(methylthio)-1,3-benzenediamine
EC: 676-676-1
104983-85-9 1-5% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Assist in breathing if necessary. In case of feeling of illness or after prolonged exposure, call a doctor.

Symptoms:

If breathing is difficult, feeling of illness (after prolonged exposure).

๐Ÿ–๏ธ Skin Contact

Remove affected clothing and shoes and wash all exposed skin area with mild soap and water, followed by warm water rinse. Wash contaminated clothing before reuse. Clean shoes thoroughly before reuse. Contact physician if symptoms persist.

Symptoms:

symptoms persist

๐Ÿ‘๏ธ Eye Contact

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Use lukewarm water if possible. Remove contact lenses (if present and easy to do) and continue flushing for at least 15 minutes. Use fingers to ensure eyelids are separated and that the eye is being irrigated.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do NOT induce vomiting. Only if the patient is conscious, rinse mouth with water. Do not swallow. Never give anything by mouth if the victim is unconscious or having convulsions. If symptoms appear, seek for medical attention.

Symptoms:

Harmful if swallowed. If symptoms appear.

๐Ÿšจ Immediate Medical Attention Required

If you feel unwell, seek medical advice. In case of feeling of illness or after prolonged exposure, call a doctor. Contact physician if symptoms persist. Seek medical attention/advice (for eyes). If symptoms appear, seek for medical attention (for ingestion). Symptomatic treatment.

Medical Treatment

Symptomatic treatment.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
various
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
organic faint resin odour
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
Not available
๐ŸงŠ Melting Point
Not available
๐Ÿ’จ Boiling Point
Not available
๐Ÿ”ฅ Flash Point
Not available
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
Not available
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
Not available
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Upper Explosive Limit
Not available
๐Ÿ“Š Lower Explosive Limit
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
Not available
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Solubility In Water
Not available
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Ensure adequate ventilation, especially in confined space. Avoid all unnecessary exposure.

๐Ÿงค Hand Protection

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times.

๐Ÿ‘๏ธ Eye Protection

Wear appropriate chemical googles, or safety glasses with side-shields.

๐Ÿ˜ท Respiratory Protection

No special requirements in normal conditions. Wear a respirator with independent air supply if vapours are formed or respiratory irritation is experienced. Supplied air respirators may be required for non-routine or emergency situations.

๐Ÿฆบ Skin/Body Protection

Wear chemical resistant footwear and clothing such as gloves, an apron or a whole-body suit as appropriate.

๐ŸŒ Environmental Exposure Controls

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities the product has cause environmental pollution (sewers, waterways, soil or air).

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Pour-Pac MP-55 Part B?

The signal word for this substance is "warning".

What is the physical form of Pour-Pac MP-55 Part B?

Pour-Pac MP-55 Part B is a liquid with various color. It has organic faint resin odour odor.

What is Pour-Pac MP-55 Part B used for?

Two-component adhesive for attaching sensors to the road surface

What are the hazard statements for Pour-Pac MP-55 Part B?

This substance has 3 hazard statements: H302: Harmful if swallowed H317: May cause an allergic skin reaction H410: Very toxic to aquatic life with long lasting effects