Cooling medium for recooling (Chiller) systems 1:4 Standard

Move to fresh air. If symptoms call a physician.

Wash off immediately with plenty of water. If symptoms call a physician.

Rinse thoroughly with plenty of water, also under the eyelids. Consult a physician.

Rinse mouth with water. Immediately give plenty of water (if possible charcoal slurry). Never give anything by mouth to an unconscious person. If a person vomits when lying on his back, place him in the recovery position. Call a physician immediately.

water spray, Carbon dioxide (CO2), Alcohol-resistant foam, Dry powder

High volume water jet

Combustible liquid. Vapors may produce explosive mixtures with air at temperatures over the flash point. Keep containers cool by spraying with water if exposed to fire, Heating will cause a pressure rise - with risk of bursting, Heating or fire can release toxic gas.

Cool closed containers exposed to fire with water spray.

Use personal protective equipment. Provide adequate ventilation. Keep away from heat and sources of ignition. Avoid contact with the skin and the eyes.

Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration. Local authorities should be advised if significant spillages cannot be contained.

Absorb with liquid-binding material. Flush away residuals with plenty of water.

Materials: liquid-binding material (sand, diatomite, acid binders, universal binders)

Keep container tightly closed. Handle and open container with care. Provide sufficient air exchange and/or exhaust in work rooms. Emergency eye wash fountains and emergency showers should be available in the immediate vicinity.

Keep container tightly closed. Keep in a well-ventilated place. Keep away from heat. Store in cool place. Keep in a dry place. Product is hygroscopic. Keep in an area equipped with solvent resistant flooring.

Take off all contaminated clothing immediately. Do not breathe gas/fumes/vapour/spray. Avoid contact with the skin and the eyes. Smoking, eating and drinking should be prohibited in the application area. Keep away from food, drink and animal feedingstuffs. Wash hands before breaks and at the end of workday.

Combustible liquid. Keep away from open flames, hot surfaces and sources of ignition.

Refer to protective measures listed in sections 7 and 8.

Protective gloves complying with EN 374. Recommended Material: butyl-rubber. Break through time: >= 480 min. Glove thickness: 0,7 mm. Protective gloves should be replaced at first signs of wear.

Tightly fitting safety goggles

In case of insufficient ventilation, wear suitable respiratory equipment. Required, if exposure limit is exceeded (e.g. OEL). Required if vapours or aerosol are released. In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air. Recommended Filter type: Combination filter: A-P2

Wear personal protective equipment.

Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration. Local authorities should be advised if significant spillages cannot be contained.

Stable under recommended storage conditions.

No decomposition if stored and applied as directed.

Reacts with alkalies. Incompatible with oxidizing agents.

Keep away from heat and sources of ignition. Keep away from direct sunlight.

Oxidizing agents, Strong acids and strong bases

Carbon oxides, Under certain fire conditions, traces of other toxic products cannot be excluded.

Can be incinerated, when in compliance with local regulations.

Disposal together with normal waste is not allowed. Do not let product enter drains.