Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
LOCTITE SF 7840 commonly used epoxy adhesive.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H341: Suspected of causing genetic defects.
- H361: Suspected of damaging the unborn child.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P201: Obtain special instructions before use.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
- P308 + P313: IF exposed or concerned: Get medical advice/attention.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Henkel AG & Co. KGaA
undefined
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Henkel information service
+49-(0)211-797-3350
DE
around-the-clock telephone service
for exceptional cases
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| BIS-[4-(2,3-EPOXIPROPOXI)PHENYL]PROPANE EC: 216-823-5 | 1675-54-3 | 25-50% | ⚠️ Hazardous |
| Neodecanoic acid glycidyl ester EC: 247-979-2 | 26761-45-5 | 5-10% | ⚠️ Hazardous |
| RP Bisphenol F-epichlorohydrin resin, MW <= 700 | 28064-14-4 | 1-5% | ⚠️ Hazardous |
| onbekend (mogelijk 4,4'-isopropylideendifenol) EC: 201-245-8 | 80-05-7 | 0.1-0.3% | ⚠️ Hazardous |
Composition Notes
If no ATE values are displayed, please refer to LD/LC50 values in Section 11. For full text of the H - statements and other abbreviations see section 16 "Other information".
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. If symptoms persist, seek medical advice.
🖐️ Skin Contact
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms:
Rash, Urticaria. Redness, inflammation.
👁️ Eye Contact
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms:
Irritation, conjunctivitis.
🍽️ Ingestion/Swallowing
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
🚨 Immediate Medical Attention Required
If symptoms persist, seek medical advice (inhalation). Obtain medical attention if irritation persists (skin). Seek medical attention from a specialist (eye). Consult a doctor (ingestion).
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure good ventilation/extraction.
🧤 Hand Protection
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
👁️ Eye Protection
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
😷 Respiratory Protection
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)
🦺 Skin/Body Protection
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
3082
📦 Proper Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
⚠️ Transport Hazard Class
9
📋 Packing Group
III
🚛 ADR Transport Precautions
not applicable
🚢 IMDG Maritime Transport Precautions
not applicable
✈️ IATA Air Transport Precautions
not applicable
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for LOCTITE SF 7840?
The signal word for this substance is "danger".
What is the physical form of LOCTITE SF 7840?
LOCTITE SF 7840 is a liquid with red color. It has mild odor.
What is the solubility of LOCTITE SF 7840?
Insoluble
What is LOCTITE SF 7840 used for?
Epoxy adhesive
What are the hazard statements for LOCTITE SF 7840?
This substance has 6 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H341: Suspected of causing genetic defects. H361: Suspected of damaging the unborn child. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LOCTITE SF 7840?
The melting point is Not applicable, Product is a liquid and the boiling point is > 148,9 C (> 300 F).