NextSDS Logo
Safety Data Sheet EN

LOCTITE LB 8040 FREEZE & RELEASE 310G AU

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE LB 8040 FREEZE & RELEASE 310G AU

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Manufacturers & Suppliers

H

Henkel New Zealand Ltd

2 Allens Rd Auckland, 2013 New Zealand

+64 (9) 272-6710

Emergency Contacts

Emergency Contact

0800 243 622

24 HOUR

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aquatic Acute Cat. 2 H401

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H401 Toxic to aquatic life.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P273 Avoid release to the environment.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50C/122F.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

Mixture

Chemical Name CAS Number Concentration Hazardous
butane 106-97-8 60 - 90% No
opaan EC: 200-827-9 74-98-6 10 - 30% No
Naphtha (petroleum), hydrotreated light, < 0.1 % benzene EC: 927-510-4 64742-49-0 10 - 30% No
non hazardous ingredients --- 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Remove contaminated clothing and footwear. Rinse with running water and soap.

Eye contact

If irritation develops, flush eyes immediately with large amounts of water.

Ingestion

Have victim rinse mouth thoroughly with water.

Immediate Medical Attention

Seek medical advice. If symptoms develop and persist, get medical attention. If irritation persists, seek medical attention or advice.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in well ventilated areas. Use general ventilation and use local exhaust, where possible, in confined or enclosed spaces.

Hands

Wear impervious (neoprene) gloves

Eyes

Avoid contact with eyes. Wear chemical goggles or a full face shield.

Respiratory

Do not inhale aerosol If inhalation risk exists, wear a respirator or air supplied mask complying with the requirements of AS/NZS 1715 and AS/NZS 1716.

Skin/Body

Wear suitable protective clothing. Wear impervious apron.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
aerosol, liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
aerosol, liquid
Colour
---
Colour Intensity
---
Form
---
Odor
Petroleum
Odor Threshold
---
Ph
- 12.50
Melting Point
---
Boiling Point
---
Flash Point
< 23 C (< 73.4 F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
0.65 - 0.70
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE LB 8040 FREEZE & RELEASE 310G AU?

The signal word is danger.

What is the physical form of LOCTITE LB 8040 FREEZE & RELEASE 310G AU?

LOCTITE LB 8040 FREEZE & RELEASE 310G AU is a aerosol, liquid appearing as aerosol, liquid . It has petroleum odor.

What is LOCTITE LB 8040 FREEZE & RELEASE 310G AU used for?

Lubricant

What are the hazard statements for LOCTITE LB 8040 FREEZE & RELEASE 310G AU?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H401: Toxic to aquatic life.

Compliance Scanner

Scan your compliance