Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
Mykal Ultrasonic Cleaner Plus is a liquid substance commonly used widespread use by professional workers; industrial uses: uses of substances as such or in preparations at industrial sites; professional uses: public domain (administration, education, entertainment, services, craftsmen); washing and cleaning products (including solvent based products); chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions.; use of non-reactive processing aid at industrial site (no inclusion into or onto article); cleaning agent/ cleaner.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H314: Causes severe skin burns and eye damage.
Precautionary Statements
- P260: Do not breathe dusts or mists.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
ZEP UK Ltd
manufacturer
Tanhouse Lane Widnes Cheshire, WA8 0RD United Kingdom
GB
+44 (0)151 422 1000
+44 (0)151 422 1011
ZEP Industries BV
distributor
Vierlinghweg 30 4612 PN Bergen op Zoom The Netherlands
NL
+31 164 250 100
+31 164 266 710
ZEP Industries BV
distributor
Vierlinghweg 30 4612 PN Bergen op Zoom The Netherlands
BE
+32 2 347 0117
+32 2 347 1395
ZEP ITALIA SRL
distributor
Piazzale Luigi Cadorna, 2 - Milano - (MI) 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000 04011 Aprilia (LT) - Italy
IT
+39.06.926691
+39.06.92747061
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
NHS
+44 0845 46 47
GB
(England or Wales)
NHS
+44 08454 24 24 24
GB
(Scotland)
Emergency Contact
112
emergency number (europe)
NPIC
+353 (0) 1 809 2166
IE
(public) (NI or Ireland)
NPIC
+353 (0) 1 809 2566
IE
(Healthcare professional) (NI or Ireland)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture of substances listed below with nonhazardous additions.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| disodium dioxido(oxo)silanepentahydrate EC: 600-279-4 | 10213-79-3 | 5-10% | Hazardous |
| Alcohols, C9-11, ethoxylated EC: 931-514-1 | 68439-46-3 | 5-10% | Hazardous |
| D-Glucopyranose, oligomers, decyl octyl glycosides EC: 500-220-1 | 68515-73-1 | 3-5% | Hazardous |
| β-Alanine, N-(2-carboxyethyl)-, N-coco alkyl derivs., disodium salts EC: 290-476-8 | 90170-43-7 | 1-2.5% | Hazardous |
| tetrasodium ethylenediaminetetraacetate EC: 200-573-9 | 64-02-8 | 1-2.5% | Hazardous |
| trisodium nitrilotriacetate EC: 225-768-6 | 5064-31-3 | 0.1-1% | Hazardous |
| Nonionic surfactants | N/A | 5-15% | Non-hazardous |
| EDTA and salts thereof | N/A | 5% | Non-hazardous |
Additional Information
For the wording of the listed hazard phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly. Immediately rinse with water. If skin irritation continues, consult a doctor.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Ingestion/Swallowing
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
No further data; see section 7.
Hand Protection
Protective gloves Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves
Eye Protection
Tightly sealed goggles
Respiratory Protection
Use suitable respiratory protective device in case of insufficient ventilation. Use suitable respiratory protective device only when aerosol or mist is formed.
Skin/Body Protection
Protective work clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
UN3267
Proper Shipping Name
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (DISODIUM TRIOXOSILICATE)
Transport Hazard Class
8 Corrosive substances.
Packing Group
III
ADR Transport Precautions
Warning: Corrosive substances.
IMDG Maritime Transport Precautions
Warning: Corrosive substances.
IATA Air Transport Precautions
Warning: Corrosive substances.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Mykal Ultrasonic Cleaner Plus?
The signal word for this substance is "danger".
What is the physical form of Mykal Ultrasonic Cleaner Plus?
Mykal Ultrasonic Cleaner Plus is a fluid appearing as liquid with light yellow color. It has characteristic odor.
What is the solubility of Mykal Ultrasonic Cleaner Plus?
Fully miscible.
What is Mykal Ultrasonic Cleaner Plus used for?
Widespread use by professional workers; Industrial uses: Uses of substances as such or in preparations at industrial sites; Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Washing and cleaning products (including solvent based products); Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions.; Use of non-reactive processing aid at industrial site (no inclusion into or onto article); Cleaning agent/ Cleaner
What are the hazard statements for Mykal Ultrasonic Cleaner Plus?
This substance has 1 hazard statements: H314: Causes severe skin burns and eye damage.
What is the melting point of Mykal Ultrasonic Cleaner Plus?
The melting point is Not available. and the boiling point is 100 °C.