Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SUNIT LO/F
- Product Code
- 046065
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal-working product
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klüber Lubrication München
manufacturer
Geisenhausenerstr. 7, 81379 München, Deutschland
+49 (0) 89 7876 0
Klüber Lubrication Belgium Netherlands
national supplier
Rue Cardinal Mercier 100, 7711 Dottignies, Belgium
+32 56 483333
Emergency Contacts
Antigifcentrum / Centre antipoisons
070 245 245
Emergency Contact
+49 89 7876 700
24 hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
solvent (hydrocarbons)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C13, isoalkanes, <2% aromatics EC: 920-901-0 | --- | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Take off all contaminated clothing immediately. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse. Wash skin thoroughly with soap and water or use recognized skin cleanser.
Symptoms: Erythema
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Seek medical advice.
Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do NOT induce vomiting. Obtain medical attention. Rinse mouth with water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately if irritation develops and persists (skin). Seek medical advice (inhalation, eye contact, ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Standard procedure for chemical fires. Cool containers/tanks with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so.
collect with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not use in areas without adequate ventilation. Do not breathe vapours or spray mist. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid contact with skin and eyes. Keep away from fire, sparks and heated surfaces. Smoking, eating and drinking should be prohibited in the application area. Take precautionary measures against static discharges. Wash hands and face before breaks and immediately after handling the product. Ensure all equipment is electrically grounded before beginning transfer operations. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not enter areas where used or stored until adequately ventilated. Do not repack. Do not re-use empty containers. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Do not store together with oxidizing and self-igniting products. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Wash hands and face before breaks and immediately after handling the product. Wash face, hands and any exposed skin thoroughly after handling. Smoking, eating and drinking should be prohibited in the application area.
Keep away from fire, sparks and heated surfaces. Take precautionary measures against static discharges. Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system
Material: Nitrile rubber, Break through time: > 10 min, Protective index: Class 1. Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses with side-shields
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Filter type: Type A (A)
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
Heat, flames and sparks.
Oxidizing agents
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Do not dispose of with domestic refuse.
Dispose of as hazardous waste in compliance with local and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SUNIT LO/F?
The signal word is danger.
What is the physical form of SUNIT LO/F?
SUNIT LO/F is a liquid with colourless color. It has slight odor.
What is the solubility of SUNIT LO/F?
insoluble
What is SUNIT LO/F used for?
Metal-working product
What are the hazard statements for SUNIT LO/F?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of SUNIT LO/F?
The melting point is No data available and the boiling point is > 190 °C.