Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alphaliner
- Product Code
- 300 / 500 / 500G / 1500 / 1800 / 1800H
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Construction chemicals
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
RELINEEUROPE AG
manufacturer
Große Ahlmühle 31, D-76865 Rohrbach
Emergency Contacts
RELINEEUROPE AG
+49 6349 93934-0
08:00-17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| styrene EC: 202-851-5 | 100-42-5 | 20 - 30% | Yes |
| 2,2-dimethoxy-1,2-diphenylethan-1-one EC: 246-386-6 | 24650-42-8 | 1 - 3% | Yes |
| phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide EC: 423-340-5 | 162881-26-7 | 1 - 3% | Yes |
| bis(2-ethylhexyl) but-2-enedioate EC: 205-524-5 | 142-16-5 | 0.1 - 2.5% | Yes |
| 1,4-dihydroxybenzene EC: 204-617-8 | 123-31-9 | 0.01 - 0.1% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately rinse with water. If skin irritation continues, consult a doctor.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical treatment.
Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Seek medical treatment (for eyes), call for a doctor (inhalation), consult a doctor (skin).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Under certain fire conditions, traces of other toxic gases cannot be excluded. Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective clothing. Avoid formation of dust. Keep away from ignition sources.
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of dust. Any unavoidable deposit of dust must be regularly removed. Ensure good ventilation/exhaustion at the workplace.
Store only in the original receptacle. Store in cool, dry conditions in well sealed receptacles. Store in the dark.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not necessary if room is well-ventilated.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR; Nitrile rubber, NBR; PVC gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not necessary if room is well-ventilated. Use suitable respiratory protective device in case of insufficient ventilation.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations. Can be disposed of with household garbage after solidification following consultation with the waste disposal facility operator and the pertinent authorities and adhering to the necessary technical regulations.
Must be specially treated adhering to official regulations. Can be disposed of with household garbage after solidification following consultation with the waste disposal facility operator and the pertinent authorities and adhering to the necessary technical regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alphaliner?
The signal word is danger.
What is the physical form of Alphaliner?
Alphaliner is a solid appearing as solid, yellowish with yellowish color. It has characteristic odor.
What is Alphaliner used for?
Construction chemicals
What are the hazard statements for Alphaliner?
This substance has 7 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H361d: Suspected of damaging the unborn child.
- H372: Causes damage to the hearing organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Alphaliner?
The melting point is Not determined. and the boiling point is Not applicable..