Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
MIRAMER PS3280 commonly used industrial use : industrial manufacture of coatings and inks professional application of coatings and inks.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264: Wash hands, forearms and face thoroughly after handling.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
- P302 + P352: IF ON SKIN: Wash with plenty of water.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P321: Specific treatment (see supplemental first aid instruction on this label).
- P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
- P501: Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
Miwon Europe GmbH
manufacturer
Haifa-Allee 2 55128 Mainz Germany
DE
+49-(0)2834- 944671-99
Miwon Specialty Chemical Co., Ltd.
undefined
167, Wanjusandan 1-ro, Bongdong-eup, Wanju-gun, Jeollabuk-do, Korea 55323
KR
+82-63-260-1500
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+49-(0)2834- 944671-0
DE
This phone number is available only during office hours.
Giftinformationszentrum-Nord der Länder Bremen, Hamburg, Niedersachsen und Schleswig-Holstein (GIZ-Nord)
+49 (0) 551 19240
DE
NHS 111/NHS 24/NHS Direct
111
GB
NHS 111/NHS 24/NHS Direct
0845 4647
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trimethylolpropane (EO)n triacrylate EC: 941-418-1 | 28961-43-5 | 50% | Hazardous |
| Polyethylene glycol diacrylate | 26570-48-9 | 50% | Hazardous |
| Toluene EC: 203-625-9 | 108-88-3 | 0.1% | Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Remove person to fresh air and keep comfortable for breathing. If breathing is difficult, give oxygen. Obtain medical assistance. Remove all contaminated clothing and footwear.
Skin Contact
Wash skin with plenty of water. Take off contaminated clothing. Wash clothing before re-using. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms:
May cause an allergic skin reaction.
Eye Contact
Rinse cautiously with water for several minutes. Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Obtain medical attention if pain, blinking or redness persists.
Symptoms:
May cause severe irritation.
Ingestion/Swallowing
Immediately call a POISON CENTER/doctor. Never attempt to induce vomiting. Do not give an unconscious person anything to drink.
Immediate Medical Attention Required
Obtain medical assistance (for inhalation). If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Obtain medical attention if pain, blinking or redness persists. Immediately call a POISON CENTER/doctor (for ingestion).
Medical Treatment
Treat symptomatically.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
Suitable Extinguishing Media
Water spray. Dry powder. Carbon dioxide.
Unsuitable Extinguishing Media
Do not use a heavy water stream.
Specific Fire Hazards
Cool containers / tanks with spray water if possible. Heating may cause an explosion. Hazardous vapours may be released.
Fire Fighting Instructions
Get the package away from the fire if this can be done without risk.
Firefighter Protection Equipment
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
Emergency Procedures
Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection".
Environmental Precautions
Avoid release to the environment.
Cleanup Methods
Contain or absorb spilled liquid with non-combustible material.
Cleanup Materials:
non-combustible material.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
Handling Precautions
• To facilitate product transfer from the original container, the product may be heated to 60°C for not more than 24 hours.
• Do not use direct steam or band heaters to heat product.
• Hot boxes or hot rooms are recommendable for heating the product.
• Product may freeze or crystallize in cold weather or even under normal storage conditions.
• To facilitate product transfer from original container, product may be heated to 40°C.
• Keep away from heat/hot surfaces/sparks/open flames/other ignition sources.
• No smoking.
• Handle and open container with care.
• Ground/bond container and receiving equipment.
• Ensure good ventilation of the work station.
• Avoid contact with skin and eyes.
• Avoid breathing vapours, spray.
• Wear personal protective equipment.
Storage Conditions
• Protect from sunlight.
• Store in a closed container.
• Store in dry, cool, well-ventilated area.
General Hygiene Measures
Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Fire Prevention Measures
Keep away from heat/hot surfaces/sparks/open flames/other ignition sources. No smoking. Ground/bond container and receiving equipment.
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Ensure good ventilation of the work station. Both local exhaust and general room ventilation are usually required.
Hand Protection
Wear protective gloves. Wear Chemical resistant gloves (according to European standard NF ISO 374-1 or equivalent). Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. (recommended) Nitrile-rubber protective gloves: Thickness >0.56mm
Eye Protection
Eye protection, including both chemical splash goggles and face shield, must be worn when possibility exists for eye contact due to spraying liquid or airborne particles. Safety glasses. Splash goggles. Protective goggles or face shield
Respiratory Protection
In case of insufficient ventilation, wear suitable respiratory equipment. Approved organic vapour respirator. Type A - High-boiling (>65 °C) organic compounds
Skin/Body Protection
If skin contact or contamination of clothing is possible, protective clothing should be worn
Environmental Exposure Controls
Avoid release to the environment.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
Chemical Stability
Stable under normal conditions.
Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
Hazardous Reactions
Heating may cause an explosion. Hazardous polymerization may occur if exposed to high temperature.
Conditions to Avoid
Keep away from heat/hot surfaces/sparks/open flames/other ignition sources. No smoking. Protect from the exposure to the light.
Incompatible Materials
Initiators. Strong alkalis. Peroxides. Curing agent. Reactive metals (Al, K, Zn ...).
Hazardous Decomposition Products
In the event of thermal decomposition : Carbon oxides (CO, CO2). Soot. Smokes.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
Not regulated for transport
Proper Shipping Name
Not regulated
Transport Hazard Class
Not regulated
Packing Group
Not regulated
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for MIRAMER PS3280?
The signal word for this substance is "warning".
What is the physical form of MIRAMER PS3280?
MIRAMER PS3280 is a liquid with not available color. It has characteristic. odor.
What is the solubility of MIRAMER PS3280?
Not available
What is MIRAMER PS3280 used for?
Industrial use : Industrial manufacture of coatings and inks Professional application of coatings and inks
What are the hazard statements for MIRAMER PS3280?
This substance has 3 hazard statements: H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MIRAMER PS3280?
The melting point is Not available and the boiling point is Not available.