Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Greenfac 5905
- Chemical Name
- Fatty acids, C14-18 & C16-18 unsatd.
Regulatory Identifiers
- CAS Number
- 67701-06-8 Check regulations →
- EC Number
- 266-930-6 Check regulations →
- REACH No.
- 01-2119657832-31-0002
Identified Uses
Antifreeze and de-icing products, additives, fillers, plasters, modeling clay, fertilizers, fuels, inks and toners, products such as ph-regulators, flocculants, precipitants, neutralization agents, laboratory chemicals, tanning, dyeing, finishing, impregnation and care of leather products, products for the dyeing, finishing and impregnation of paper and cardboard including bleaches and other processing aids, polishes and wax blends, textile dyes, for finishing products and the impregnation of textile materials; including bleaches and other processing aids, adhesives, sealants, coatings and paints, thinners, paint removers, intermediates, preparations and polymeric compounds.
Manufacturers & Suppliers
Green Oleo S.r.l.
manufacturer
Via Bergamo, 66, 26100 Cremona (CR) Italy
Emergency Contacts
Emergency Contact
+39 03724871
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Not specified EC: 266-930-6 | 67701-06-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to open air. In the event of breathing difficulties, get medical advice/attention immediately.
Remove contaminated clothing. Wash immediately with plenty of water. If irritation persists, get medical advice/attention. Wash contaminated clothing before using it again.
Remove contact lenses, if present. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. If problem persists, seek medical advice.
Get medical advice/attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person, unless authorised by a doctor.
Immediate Medical Attention
Get medical advice/attention immediately in the event of breathing difficulties (inhalation). Get medical advice/attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder and water spray.
Do not use jets of water.
Do not breathe combustion products.
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Firefighter Protection
Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Collect as much material as possible and eliminate the rest using jets of water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before handling the product, consult all the other sections of this material safety data sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
Keep the product in clearly labelled containers. Keep containers away from any incompatible materials, see section 10 for details.
Do not eat, drink or smoke during use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374). Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivity reactions.
Wear airtight protective goggles (see standard EN 166).
None required, unless indicated otherwise in the chemical risk assessment.
Wear category I professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage.
There are no particular risks of reaction with other substances in normal conditions of use.
No hazardous reactions are foreseeable in normal conditions of use and storage.
Avoid overheating.
Strong reducing or oxidising agents, strong acids or alkalis, hot material.
Information not available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
Reuse, when possible. Neat product residues should be considered special non-hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Greenfac 5905?
The signal word is no signal word.
What is the physical form of Greenfac 5905?
Greenfac 5905 is a paste with straw yellow color. It has mild odor.
What is the solubility of Greenfac 5905?
soluble in organic solvents
What is Greenfac 5905 used for?
Antifreeze and de-icing products, additives, fillers, plasters, modeling clay, fertilizers, fuels, inks and toners, products such as ph-regulators, flocculants, precipitants, neutralization agents, laboratory chemicals, tanning, dyeing, finishing, impregnation and care of leather products, products for the dyeing, finishing and impregnation of paper and cardboard including bleaches and other processing aids, polishes and wax blends, textile dyes, for finishing products and the impregnation of textile materials; including bleaches and other processing aids, adhesives, sealants, coatings and paints, thinners, paint removers, intermediates, preparations and polymeric compounds.
What is the melting point of Greenfac 5905?
The melting point is 35 – 65 °C and the boiling point is 225 °C @ 10 hPa.