Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CONCENTRATED SOAP SOLUTION
- Product Code
- 49900000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For automatic and ultrasonic cleaning of metallographic specimens.
Manufacturers & Suppliers
Struers ApS
manufacturer
Pederstrupvej 84, DK-2750 Ballerup
+45 44 600 800
Emergency Contacts
NHS
111
Emergency Contact
+45 44 600 800
Only during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains: anionic surfactants, non-ionic surfactants, soap, glycols, water and preservative.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohol, C9-11 ethoxylated EC: 614-482-0 | 68439-46-3 | 5 - 15% | Yes |
| Diethylene glycol monobutyl ether EC: 203-961-6 | 112-34-5 | 1 - 5% | Yes |
| Sodium lauryl ether sulfate EC: 500-223-8 | 68585-34-2 | 1 - 5% | Yes |
| 1,2-Benzisothiazolin-3-one EC: 220-120-9 | 2634-33-5 | 0.005% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person into fresh air and keep at rest.
Remove contaminated clothes and rinse skin thoroughly with water.
Immediately flush with plenty of water. Remove any contact lenses and open eyes wide apart. Call an ambulance and continue flushing during transportation to hospital. Bring these instructions.
Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable seek hospital and bring these instructions. Do not induce vomiting.
Immediate Medical Attention
Call an ambulance and continue flushing during transportation to hospital. If person becomes uncomfortable seek hospital and bring these instructions.
Medical Treatment
Treat symptomatically. (*)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam, carbon dioxide, dry powder or water fog
Do not use water jet as an extinguisher, as this will spread the fire.
In case of fire, toxic gases may be formed.
Firefighter Protection
Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of spray mist and contact with skin and eyes.
Avoid discharge onto the ground.
Absorb spillage with suitable absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of spray mists and contact with skin and eyes. Observe good chemical hygiene practices.
Store in tightly closed original container. Store at room temperature.
Observe good chemical hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours. Local exhaust is recommended.
Wear protective gloves. Nitrile gloves are recommended, but be aware that the liquid may penetrate the gloves. Frequent change is advisable. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material.
Wear goggles/face shield.
In case of inadequate ventilation and work of brief duration, use suitable respiratory equipment. Use respiratory equipment with combination filter, type A2/P2.
Wear apron or protective clothing in case of splashes.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
No data available.
None under normal conditions. (*)
Heating.
Strong oxidising substances, strong acids and strong bases.
In case of fire, toxic gases may be formed. (*)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CONCENTRATED SOAP SOLUTION?
The signal word is danger.
What is the physical form of CONCENTRATED SOAP SOLUTION?
CONCENTRATED SOAP SOLUTION is a liquid appearing as yellow liquid with yellow color. It has characteristic odor.
What is the solubility of CONCENTRATED SOAP SOLUTION?
soluble in water
What is CONCENTRATED SOAP SOLUTION used for?
For automatic and ultrasonic cleaning of metallographic specimens.
What are the hazard statements for CONCENTRATED SOAP SOLUTION?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.