Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB
- Product Code
- 1136823
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Hydroxyethyl methacrylate | 868-77-9 | 0.1 - 1% | Yes |
| methacrylic acid | 79-41-4 | 0.1 - 1% | Yes |
| Methyl methacrylate | 80-62-6 | 0.1 - 1% | Yes |
| Butyl acrylate | 141-32-2 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. Seek medical attention at once (for eye contact). Immediate medical treatment necessary (for ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.
Store between 5 °C (41°F) and 40 °C (104°F). Above temperature limit the product is irreversibly damaged and no longer usable. Below temperature limit the product will be irreversibly damaged and no longer usable.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
None under normal processing.
Excessive heat and contamination. Freezing conditions.
Not available.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB?
The signal word is warning.
What is the physical form of BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB?
BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB is a liquid with off white color. It has mild odor.
What is the solubility of BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB?
Negligible
What is BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB used for?
Conversion coating
What are the hazard statements for BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB?
This substance has 1 hazard statement:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE M-PP TD-3002-BB M-PP INTERMEDIATE known as AQUENCE TD-3002-BB?
The melting point is Not available. and the boiling point is > 98 °C (> 208.4 °F)calculated.