Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-IC 72030 EU
- Product Code
- 3122122
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulfuric acid | 7664-93-9 | 30 - 60% | Yes |
| Fatty alcohol ethoxylate C12-18 9EO | 68213-23-0 | 1 - 5% | Yes |
| Ferric sulfate | 10028-22-5 | 1 - 5% | Yes |
IDH number: 3122122 Product name: BONDERITE C-IC 72030 EU
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove victim to fresh air.
Wash affected area immediately with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder, water spray jet, fine water spray
Formation of toxic gases is possible during heating or in fires.
Wear protective equipment. Wear self-contained breathing apparatus.
Firefighter Protection
Wear protective equipment. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not empty into drains / surface water / ground water.
Remove with liquid-absorbing material (sand, peat, sawdust).
Materials: sand, peat, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. When diluting, always stir slowly the product into standing water.
Ensure adequate ventilation. Store in sealed original container. Store in a dry place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
None under normal processing.
No decomposition if used according to specifications.
Reaction with strong bases
None if used for intended purpose. In case of fire toxic gases can be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Sulfuric acid, FERRIC SULPHATE)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-IC 72030 EU?
The signal word is danger.
What is the physical form of BONDERITE C-IC 72030 EU?
BONDERITE C-IC 72030 EU is a liquid with light amber color. It has characteristic odor.
What is BONDERITE C-IC 72030 EU used for?
Cleaner
What are the hazard statements for BONDERITE C-IC 72030 EU?
This substance has 3 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H350: MAY CAUSE CANCER.
What is the melting point of BONDERITE C-IC 72030 EU?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F) Supplier method.