Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols
- Product Code
- 3188
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hand Sanitiser
Manufacturers & Suppliers
Maclin Sourcing Solutions
Unit 3, Risby Business Park, Newmarket Road, Risby, IP28 6RD
01284 810 887
Emergency Contacts
Emergency Contact
(+44) 01284 810 887
09:00 - 17:00 Mon to Fri
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PETROLEUM GASES, LIQUEFIED <0.1% 1,3-BUTADIENE EC: 270-704-2 | 68476-85-7 | 5 - 10% | Yes |
| SODIUM BENZOATE EC: 208-534-8 | 532-32-1 | 1 - 5% | Yes |
| C12-C16 ALKYL BENZYL DIMETHYL AMMONIUM CHLORIDE | --- | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. If in doubt, get medical attention promptly.
Remove any contact lenses and open eyelids wide apart. Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes. Get medical attention promptly if symptoms occur after washing.
Rinse mouth thoroughly with water. Remove person to fresh air and keep comfortable for breathing. Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, carbon dioxide or dry powder.
Containers can burst violently or explode when heated, due to excessive pressure build-up.
Use water to keep fire exposed containers cool and disperse vapours. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.
Firefighter Protection
Use water to keep fire exposed containers cool and disperse vapours. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of vapours. Avoid contact with eyes.
Avoid discharge into drains.
Eliminate all sources of ignition. No smoking, sparks, flames or other sources of ignition near spillage. Provide adequate ventilation.
Related Products
Similar products with comparable safety profiles
Cutan Complete Foaming Hand Sanitiser
---
Invirtu Foam Hand Sanitiser
---
Scott® Control™ Antibacterial Foam Hand Cleanser
UFI: Q0KV-D138-700P-GKU2
KLEENEX® Gel Hand Sanitiser
UFI: 6PU7-00A0-W00D-0KSH
ALCOHOL HAND SANITIZER GEL5L
---
Tork Alcohol Liquid Hand Sanitizer
---
ADVANCED GEL HAND SANITIZER
---
Soudal Swipex Handcleaner
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Read and follow manufacturer's recommendations. When sprayed on a naked flame or any incandescent material the aerosol vapours can be ignited. Use suitable respiratory protection if ventilation is inadequate.
Protect from freezing and direct sunlight. Store in a dry place. Do not store near heat sources or expose to high temperatures.
Do not eat, drink or smoke when using this product.
Keep away from heat, sparks and open flame. When sprayed on a naked flame or any incandescent material the aerosol vapours can be ignited.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No specific requirements are anticipated under normal conditions of use.
Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible.
No specific recommendations. If ventilation is inadequate, suitable respiratory protection must be worn.
Wear suitable protective equipment for prolonged exposure and/or high concentrations of vapours, spray or mist.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product may not be stable under some conditions of storage or use.
No test data specifically related to reactivity available for this product or its ingredients.
None known.
Avoid heat, flames and other sources of ignition. Avoid exposing aerosol containers to high temperatures or direct sunlight.
None known.
None at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS, FLAMMABLE
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols?
The signal word is danger.
What is the physical form of Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols?
Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols is a aerosol appearing as aerosol. with colourless to pale yellow. color. It has characteristic. odor.
What is the solubility of Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols?
No information available.
What is Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols used for?
Hand Sanitiser
What are the hazard statements for Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: may burst if heated.
What is the melting point of Maclin Sourcing Solutions Limited - Prosan Alcohol Free Foaming Hand Sanitiser PN6047 200ml Aerosols?
The melting point is No information available. and the boiling point is -41 (-41 TO >35)°C.