NextSDS Logo
Safety Data Sheet NL

CLEAN SUMP

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CLEAN SUMP
Product Code
DTA1243

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Wasmiddel voor machine-koelmiddeltank.

Uses advised against

Maakt gebruik van andere dan de aanbevolen.

Manufacturers & Suppliers

L

Link Gruppo S.p.A.

manufacturer

Via G. Mazzini, 6, 40010 Bentivoglio (BO) ITALY

+39 051 891911

Emergency Contacts

Emergency Contact

070 245 245

elke dag, 24 op 24 uur

Emergency Contact

8001 5500

elke dag, 24 op 24 uur

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1A H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H314 Veroorzaakt ernstige brandwonden en oogletsel.
H317 Kan een allergische huidreactie veroorzaken.
H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P260 Stof / rook / gas / nevel / damp / niet inademen.
P264 Na het werken met dit product de huid grondig wassen.
P280 Beschermende handschoenen / kleding en oog- / gelaatsbescherming dragen.
P303+P361+P353 BIJ CONTACT MET DE HUID (of het haar): verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen [of afdouchen].
P305+P351+P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen.
P310 Onmiddellijk een ANTIGIFCENTRUM / arts als u zich niet goed voelt.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mengsels
Chemical Name CAS Number Concentration Hazardous
BENZENESULFONIC ACID, 4-C10-13-SEC-ALKYL DERIVS. EC: 287-494-3 85536-14-7 3.4 - 5.4% Yes
TRISODIUM ORTHOPHOSPHATE EC: 231-509-8 7601-54-9 2.5 - 4.5% Yes
DINATRIUMMETASILICAAT EC: 229-912-9 6834-92-0 1.6 - 3.6% Yes
2-(2-BUTOXYETHOXY)ETHANOL EC: 203-961-6 112-34-5 1.6 - 3.6% Yes
(2-METHOXYMETHYLETHOXY)PROPANOL EC: 252-104-2 34590-94-8 0.7 - 2.7% No
TETRANATRIUMETHYLEENDIAMINETETRAACETAAT EC: 200-573-9 64-02-8 0.5 - 1.098% Yes
2-METHYL-2H-ISOTHIAZOOL-3-ON EC: 220-239-6 2682-20-4 0.1 - 0.312% Yes
1,2-BENZISOTHIAZOOL-3(2H)-ON EC: 220-120-9 2634-33-5 0.1 - 0.312% Yes
1,2-ETHAANDIOL EC: 203-473-3 107-21-1 0.01 - 0.248% Yes
PYRIDINE-2-THIOL 1-OXIDE, SODIUM SALT EC: 223-296-5 3811-73-2 0.01 - 0.098% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Waarschuw onmiddellijk een arts. Breng het slachtoffer in de frisse lucht, zover mogelijk van de plaats van het ongeval. Bij ademstilstand kunstmatige ademhaling toepassen.

Skin contact

Besmette kleding uittrekken. Onmiddellijk afdouchen. Raadpleeg direct een arts.

Eye contact

Contactlenzen verwijderen. Onmiddellijk minstens 30/60 minuten met veel water wassen, met de oogleden goed open. Raadpleeg direct een arts.

Ingestion

Zoveel mogelijk water laten drinken. Raadpleeg direct een arts. Braken niet opwekken als de arts daartoe niet uitdrukkelijk toestemming heeft gegeven.

Immediate Medical Attention

Raadpleeg direct een arts voor alle blootstellingsroutes. Symptomatisch behandelen.

Medical Treatment

Informatie voor de arts: symptomatisch behandelen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good ventilation at the workplace must be ensured, with the aid of effective local exhaust ventilation.

Hands

Protect hands with work gloves category III (ref. standard EN 374). For the final choice of work gloves, compatibility, degradation, breakthrough time, and permeation must be taken into account. In the case of preparations, the resistance of the work gloves must be checked before use, as this is not predictable. The wear time of the gloves depends on the duration and manner of use.

Eyes

It is recommended to wear hermetically sealed safety glasses (ref. standard EN 166).

Respiratory

If the threshold limit value (e.g., TLV-TWA) of the substance or of one or more substances present in the product is exceeded, it is advisable to use a mask with a type A filter, the class (1, 2 or 3) of which is chosen based on the concentration limit value (ref. standard EN 14387). In the presence of gases or vapors of different types and/or gases or vapors with particles (aerosols, smoke, mist, etc.), combination filters should be used. The use of respiratory protective equipment is necessary when the technical measures applied are not sufficient to limit worker exposure to the relevant threshold values. The protection offered by the masks is limited in any case. If the substance concerned is odorless or its odor threshold is above the corresponding TLV-TWA, and in any case in emergencies, use an independent compressed air breathing apparatus with open circuit (ref. standard EN 137) or a self-priming hose mask (ref. standard EN 138). For the correct choice of respiratory protective equipment, consult standard EN 529.

Skin/Body

Wear long-sleeved work clothing and safety footwear for professional use category II (ref. Regulation 2016/425 and standard EN ISO 20344).

Environmental

Emissions from production processes, including emissions from ventilation equipment, must be controlled in the context of compliance with environmental protection legislation. Product residues must not be discharged uncontrolled into wastewater or waterways.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
Niet beschikbaar
Molecular Weight
---
Odor Threshold
Niet beschikbaar
Boiling Point
- 100 C
Flammability
Niet van toepassing
Properties Status
---
Colour Intensity
---
Dynamic Viscosity
---
Ph
12 - 13
Auto Ignition Temperature
Niet beschikbaar
Density
---
Form
---
Freezing Point
Niet beschikbaar
Vapor Density
Niet beschikbaar
Relative Evaporation Rate
---
Explosive Limits
---
Appearance
---
Solubility In Water
total
Softening Point
---
Lower Explosive Limit
Niet van toepassing
Upper Explosive Limit
Niet van toepassing
Evaporation Rate
Niet beschikbaar
Vapor Pressure
Niet beschikbaar
Odor
kenmerkend
Solubility In Fat
---
Physical State Data
liquid
Partition Coefficient
Niet beschikbaar
Colour
strogeel
Melting Point
Niet beschikbaar
Cloud Point
---
Relative Density
1,06 - 1,07 Kg/l (20C)
Bulk Density
---
State Under Standard Conditions
---
Crystallisation Point
---
Flash Point
- 100 C
Physical State
Heldere vloeistof
Voc Content
2,70 %
Metal Corrosion
---
Kinematic Viscosity
---
Solubility
In water: total; in aceton: gedeeltelijk
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
CORROSIVE LIQUID, N.O.S. (SODIUM HYDROXIDE; BENZENESULFONIC ACID, 4-C10-13-SEC-ALKYL DERIVS.)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CLEAN SUMP?

The signal word is danger.

What is the physical form of CLEAN SUMP?

CLEAN SUMP is a heldere vloeistof with strogeel color. It has kenmerkend odor.

What is the solubility of CLEAN SUMP?

In water: total; in aceton: gedeeltelijk

What is CLEAN SUMP used for?

Wasmiddel voor machine-koelmiddeltank.

What are the hazard statements for CLEAN SUMP?

This substance has 3 hazard statements:

  • H314: Veroorzaakt ernstige brandwonden en oogletsel.
  • H317: Kan een allergische huidreactie veroorzaken.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of CLEAN SUMP?

The melting point is Niet beschikbaar and the boiling point is - 100 C.