Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- High Performance Cutting Spray Alpha 93
- Product Code
- 084210_300
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Snijolie
Manufacturers & Suppliers
Jokisch GmbH
manufacturer
Industriestraße 5, D-33813 Oerlinghausen
+49(0)5202/9734-0
http://www.jokisch-fluids.de
Hoffmann GmbH Qualitätswerkzeuge
distributor
Haberlandstraße 55, D-81241 München
+49 89 8391-9900
http://www.hoffmann-group.com
Emergency Contacts
Emergency Contact
+ 31 10 713 8195
24h
EN, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Gemisch besteht aus nachfolgend angefhrten Stoffen mit ungefhrlichen Beimengungen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butaan EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| propaan EC: 200-827-9 | 74-98-6 | 3 - 10% | Yes |
| isobutaan EC: 200-857-2 | 75-28-5 | 1 - 2.5% | Yes |
Volledige inhoud van de H- en EUH-zinnen: zie rubriek 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor frisse lucht zorgen. Bij aanhoudende klachten arts raadplegen.
Na aanraking met de huid onmiddellijk wassen met: Water en zeep.
Als het product in de ogen komt, direct bij geopende oogspleet met veel water minstens 5 minuten spoelen. Aansluitend oogarts consulteren.
Onmiddellijk medisch advies inwinnen.
Immediate Medical Attention
Onmiddellijk medisch advies inwinnen. Aansluitend oogarts consulteren.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Beschermingshandschoenen tegen chemicaliën moeten in hun uitvoering afhankelijk van de concentratie van de gevaarlijke en -hoeveelheid speciaal voor de werkplek uitgekozen worden. Het wordt aanbevolen zich over de bestendigheid tegen chemicaliën van de bovengenoemde beschermingshandschoenen voor speciaal gebruik met de handschoenenfabrikant te laten informeren. Er moeten geteste beschermingshandschoenen gedragen worden: Nitrile. EN ISO 374 dikte van het handschoenenmateriaal: > 480 min / 0,4mm
Oogbescherming: niet vereist.
Gas/rook/damp/spuitnevel niet inademen. Bij juist gebruik en onder normale omstandigheden is een middel ter bescherming van de ademhaling niet nodig.
Alleen passende, gemakkelijke zittende en schone beschermingskleding dragen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for High Performance Cutting Spray Alpha 93?
The signal word is danger.
What is the physical form of High Performance Cutting Spray Alpha 93?
High Performance Cutting Spray Alpha 93 is a aerosol with lichtgeel color. It has karakteristiek odor.
What is the solubility of High Performance Cutting Spray Alpha 93?
In Wasser nicht bzw. weinig mischbaar.
What is High Performance Cutting Spray Alpha 93 used for?
Snijolie
What are the hazard statements for High Performance Cutting Spray Alpha 93?
This substance has 2 hazard statements:
- H222: Zeer licht ontvlambare aerosol.
- H229: Houder onder druk: kan open barsten bij verhitting.
What is the melting point of High Performance Cutting Spray Alpha 93?
The melting point is niet bepaald and the boiling point is -44 C.