Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION
- Product Code
- N8125035
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratoriumchemcaliën
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
PerkinElmer, Inc.
manufacturer
710 Bridgeport Avenue, Shelton, Connecticut 06484 USA
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
+1 703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Frisse lucht toedienen; bij klachten arts ontbieden.
Over het algemeen is het product niet prikkelend voor de huid
Ogen bij geopend ooglid meerdere minuten met stromend water spoelen
Als de klachten niet minderen, een arts raadplegen
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, bluspoeder of waterstraal. Grotere brand met waterstraal bestrijden of met schuim, dat tegen alcohol bestand is.
Geen verdere relevante informatie verkrijgbaar.
Firefighter Protection
Geen bijzondere maatregelen nodig.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet nodig
Met veel water verdunnen.
Met vloeistofbindend materiaal opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
Calibrator for automated systems
---
CROMAX PRO BC VISC. BALANCER
---
TURBIDITY 1000 NTU CALIBRATION STANDARD
---
System Calibrator
---
Emit® Calibrators/Controls Levels 0,1,2,3,4 and 5
---
WB2030 CROMAX(R) PRO VISCOSITY BALANCER
---
STANDARD-3ICPMS MULTIELEM CAL
---
CRP Latex Calibrator Normal (N) Set
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Geen bijzondere maatregelen noodzakelijk.
Geen bijzondere eisen.
Geen bijzondere maatregelen noodzakelijk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Op grond van falende testen kan geen aanbeveling voor handschoenmateriaal voor het product / de bereiding / het chemicaliën mengsel afgegeven worden. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Bij het omgieten is het gebruik van een veiligheidsbril aan te bevelen.
Niet noodzakelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen afbraak bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke reacties bekend.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION?
The signal word is no signal word.
What is the physical form of ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION?
ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION is a liquid with transparent color. It has reukloos odor.
What is ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION used for?
Laboratoriumchemcaliën
What is the melting point of ELAN 6100 DRC SETUP / STABILITY / MASSCALIBRATION SOLUTION?
The melting point is 0 °C and the boiling point is 100 °C.