NextSDS Logo
Ch

Chlormequat - Chlorid 750

DANGER liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Chlormequat - Chlorid 750
Product Code
30058165/SDS_CPA_IE/EN

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
crop protection product, growth regulator

Overview

Chlormequat - Chlorid 750 is a light yellow substance commonly used crop protection product, growth regulator.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Met. Corr. Category 1 H290
Acute Tox. Category 3 H301
Acute Tox. Category 4 H312
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H312: Harmful in contact with skin.
  • H301: Toxic if swallowed.
  • H290: May be corrosive to metals.
  • H412: Harmful to aquatic life with long lasting effects.
  • EUH401: To avoid risks to human health and the environment, comply with the instructions for use.

Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P103: Read carefully and follow all instructions.
  • P234: Keep only in original packaging.
  • P264: Wash contaminated body parts thoroughly after handling.
  • P280: Wear protective gloves and clothing.
  • P312: Call a POISON CENTER or physician if you feel unwell.
  • IF SWALLOWED: Immediately call a POISON CENTER or physician.
  • IF ON SKIN (or hair): Wash with plenty of soap and water.
  • P330: Rinse mouth
  • P361: Take off immediately all contaminated clothing.
  • P363: Wash contaminated clothing before reuse.
  • P390: Absorb spillage to prevent material damage.
  • P405: Store locked up.
  • P501: Dispose of contents/container to a licensed hazardous waste disposal contractor or collection site except for triple rinsed empty containers which can be disposed of as non-hazardous waste.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

BASF SE

manufacturer

๐Ÿ“

67056 Ludwigshafen, GERMANY

๐ŸŒ

DE

BASF Ireland DAC

supplier

๐Ÿ“

Asgard House, 19-20 City Quay, Dublin, D02 K744 Ireland

๐ŸŒ

IE

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+353 21 451-7100

๐ŸŒ

IE

๐Ÿ•’

8am-10pm (seven days)

National Poisons Information Centre, Beaumont Hospital

๐Ÿ“ž

01 8092566

๐ŸŒ

IE

Emergency Contact

๐Ÿ“ž

+49 180 2273-112

๐ŸŒ

DE

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

crop protection product, growth regulator, Soluble concentrate (SL)

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
chlormequat chloride
EC: 213-666-4
999-81-5 65.56% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Keep patient calm, remove to fresh air, seek medical attention.

๐Ÿ–๏ธ Skin Contact

Immediately wash thoroughly with soap and water, seek medical attention.

๐Ÿ‘๏ธ Eye Contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

๐Ÿฝ๏ธ Ingestion/Swallowing

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

โœ… Suitable Extinguishing Media

water spray, foam, dry powder, carbon dioxide

โŒ Unsuitable Extinguishing Media

water jet

โš ๏ธ Specific Fire Hazards

Endangering substances: carbon monoxide, Carbon dioxide, hydrogen chloride, halogenated compounds, nitrogen oxides. The substances/groups of substances mentioned can be released in case of fire.

๐Ÿ”ฅ Fire Fighting Instructions

Keep containers cool by spraying with water if exposed to fire.

๐Ÿ›ก๏ธ Firefighter Protection Equipment

Wear self-contained breathing apparatus and chemical-protective clothing.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

๐Ÿšจ Emergency Procedures

Do not breathe vapour/spray. Use personal protective clothing. Avoid contact with the skin, eyes and clothing.

๐Ÿ’ง Small Spill Procedures

Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).

๐ŸŒŠ Large Spill Procedures

Dike spillage. Pump off product.

๐ŸŒ Environmental Precautions

Do not discharge into drains/surface waters/groundwater. Do not discharge into the subsoil/soil. Do not allow contamination of public drains or surface or ground waters. Inform local water plc if spillage enters drains and the Environmental Protection Agency if it enters surface or ground waters.

๐Ÿงน Cleanup Methods

Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations.

Cleanup Materials:

suitable containers, water and detergents

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
liquid
๐Ÿ‘๏ธ Appearance
light yellow
๐ŸŽจ Colour
light yellow
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
liquid
๐Ÿ‘ƒ Odor
sweetish, moderate odour
๐Ÿ“Š Odor Threshold
Not determined due to potential health hazard by inhalation.
๐Ÿงช Ph
approx. 3 - 7
๐ŸงŠ Melting Point
approx. - 17 โ„ƒ
Critical Property
๐Ÿ’จ Boiling Point
approx. 100 โ„ƒ
Critical Property
๐Ÿ”ฅ Flash Point
No flash point - Measurement made up to the boiling point.
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
not applicable
๐Ÿ’จ Vapor Pressure
approx. 23.3 hPa (20 โ„ƒ)
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
Not available
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
approx. 1.14 g/cm3 (20 โ„ƒ)
Critical Property
๐Ÿ”ฅ Flammability
not applicable
๐Ÿ“Š Upper Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
๐Ÿ“Š Lower Explosive Limit
As a result of our experience with this product and our knowledge of its composition we do not expect any hazard as long as the product is used appropriately and in accordance with the intended use.
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
approx. 355 โ„ƒ
๐Ÿ“Š Decomposition Temperature
No decomposition if stored and handled as prescribed/indicated.
๐Ÿ’ง Solubility
miscible
๐Ÿ“Š Partition Coefficient
- 3.47 (pH value: 7)
๐Ÿ“Š Solubility In Water
miscible
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Corrosion to metals - Corrosion rate > 6.25 mm/a using 7075-T6 or AZ5GU-T6
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

โš ๏ธ Handling Precautions

โ€ข No special measures necessary if stored and handled correctly.

โ€ข Ensure thorough ventilation of stores and work areas.

โ€ข When using do not eat, drink or smoke.

โ€ข Hands and/or face should be washed before breaks and at the end of the shift.

โ€ข Remove contaminated clothing and protective equipment before entering eating areas.

๐Ÿช Storage Conditions

โ€ข Keep away from heat.

โ€ข Protect from direct sunlight.

๐Ÿงผ General Hygiene Measures

Hands and/or face should be washed before breaks and at the end of the shift. Remove contaminated clothing and protective equipment before entering eating areas.

๐Ÿ”ฅ Fire Prevention Measures

The substance/product is non-combustible. Product is not explosive.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿงค Hand Protection

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

๐Ÿ‘๏ธ Eye Protection

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

๐Ÿ˜ท Respiratory Protection

Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e. g. EN 14387 Type ABEK-P3) (Combination filter EN 14387 ABEK)

๐Ÿฆบ Skin/Body Protection

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

โœ… Chemical Stability

The product is stable if stored and handled as prescribed/indicated.

โš—๏ธ Reactivity

No hazardous reactions if stored and handled as prescribed/indicated. Corrosive effect on: Aluminium mild steel Corrosion rate > 6.25 mm/a using 7075-T6 or AZ5GU-T6

โš ๏ธ Hazardous Reactions

No hazardous reactions if stored and handled as prescribed/indicated.

๐Ÿšซ Conditions to Avoid

See SDS section 7 - Handling and storage.

๐Ÿงช Incompatible Materials

Substances to avoid: strong bases, strong acids, strong oxidizing agents

๐Ÿ’จ Hazardous Decomposition Products

No hazardous decomposition products if stored and handled as prescribed/indicated.

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

๐ŸŒฑ Toxicity

Assessment of aquatic toxicity: Harmful to aquatic life with long lasting effects. The product has not been tested. The statement has been derived from the properties of the individual components. Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Toxicity to fish: LC50 (96 h) > 100 mg/l, Cyprinus carpio (OECD 203; ISO 7346; 84/449/EEC, C.1, static) The details of the toxic effect relate to the nominal concentration. Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Aquatic invertebrates: LC50 (96 h) 31.7 mg/l, Daphnia magna Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Aquatic plants: EC50 (7 d) 28.0 mg/l (growth rate), Lemna gibba (static) The product has not been tested. The data have been deduced from values for a preparation or mixture with a lower substance concentration. EC10 (7 d) 0.6 mg/l, Lemna gibba Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Chronic toxicity to fish: No observed effect concentration (21 d) 43.1 mg/l, Oncorhynchus mykiss Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Chronic toxicity to aquatic invertebrates: No observed effect concentration (21 d) 2.44 mg/l, Daphnia magna

๐ŸŒฑ Persistence and degradability

Assessment biodegradation and elimination (H2O): The product has not been tested. The statement has been derived from the properties of the individual components. Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Assessment biodegradation and elimination (H2O): Readily biodegradable (according to OECD criteria).

๐ŸŒฑ Bioaccumulative potential

Assessment bioaccumulation potential: The product has not been tested. The statement has been derived from the properties of the individual components. Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Bioaccumulation potential: Because of the n-octanol/water distribution coefficient (log Pow) accumulation in organisms is not to be expected.

๐ŸŒฑ Mobility in soil

Assessment transport between environmental compartments: Adsorption in soil: The product has not been tested. The statement has been derived from the properties of the individual components. Information on: chlormequat chloride (ISO); 2-chloroethyltrimethylammonium chloride Assessment transport between environmental compartments: Adsorption in soil: Following exposure to soil, the product trickles away and can - dependant on degradation - be transported to deeper soil areas with larger water loads.

๐ŸŒฑ Results of PBT and vPvB assessment

The product does not contain a substance fulfilling the PBT (persistent/bioaccumulative/toxic) criteria or the vPvB (very persistent/very bioaccumulative) criteria.

๐ŸŒฑ Endocrine disrupting properties

Product does not contain a substance above legal limits included in the list established in accordance with Article 59(1) of Regulation (EC) No 1907/2006 for having endocrine disrupting properties or is identified to have endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605.

๐ŸŒฑ Other adverse effects

The product does not contain substances that are listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

โ™ป๏ธ Waste Treatment Methods

Must be sent to a suitable incineration plant, observing local regulations.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN2922

๐Ÿ“ฆ Proper Shipping Name

CORROSIVE LIQUID, TOXIC, N.O.S. (CHLORMEQUAT CHLORIDE)

โš ๏ธ Transport Hazard Class

8,6.1

๐Ÿ“‹ Packing Group

III

๐Ÿš› ADR Transport Precautions

Tunnel code: E

๐Ÿšข IMDG Maritime Transport Precautions

EmS: F-A; S-B

โœˆ๏ธ IATA Air Transport Precautions

None known

Regulatory Information & Compliance

Chemical regulations, safety assessments, and regulatory compliance status

๐Ÿ“‹ Regulatory Summary

Restrictions of Regulation (EC) No 1907/2006, Annex XVII, do not apply for the intended use(s) of the product given in this SDS.

โŒ Chemical Safety Assessment

No chemical safety assessment has been performed for this substance.

โ„น๏ธ Additional Regulatory Information

This product may be subject to the Seveso III Directive and amendments if specific threshold tonnages are exceeded.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Chlormequat - Chlorid 750?

The signal word for this substance is "danger".

What is the physical form of Chlormequat - Chlorid 750?

Chlormequat - Chlorid 750 is a liquid appearing as light yellow with light yellow color. It has sweetish, moderate odour odor.

What is the solubility of Chlormequat - Chlorid 750?

miscible

What is Chlormequat - Chlorid 750 used for?

crop protection product, growth regulator

What are the hazard statements for Chlormequat - Chlorid 750?

This substance has 5 hazard statements: H312: Harmful in contact with skin. H301: Toxic if swallowed. H290: May be corrosive to metals. H412: Harmful to aquatic life with long lasting effects. EUH401: To avoid risks to human health and the environment, comply with the instructions for use.

What is the melting point of Chlormequat - Chlorid 750?

The melting point is approx. - 17 โ„ƒ and the boiling point is approx. 100 โ„ƒ.