Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
ALUMINUM WELDING WIRE AND METALLIZING WIRE is a solid substance commonly used welding, filler metal, metallizing, brazing.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
Precautionary Statements
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
AlcoTec Wire Corporation
manufacturer
2750 Aero Park Drive, Traverse City, MI 49686-9263 USA
US
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Aluminum alloys containing various elements (Si, Fe, Cu, Mn, Mg, Cr, Ni, Zn, Ti, others) in specified ranges or maximums by weight percent. Aluminum is typically the remainder or minimum.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titanium | N/A | 0.002-0.3% | ✓ Non-hazardous |
| Aluminum | N/A | 99-99.99% | ✓ Non-hazardous |
| Silicon | N/A | 0.006-13% | ✓ Non-hazardous |
| Iron | N/A | 0.006-0.8% | ✓ Non-hazardous |
| Copper | N/A | 0.005-6.8% | ✓ Non-hazardous |
| Manganese | N/A | 0.002-1% | ✓ Non-hazardous |
| Magnesium | N/A | 0.01-5.5% | ✓ Non-hazardous |
| Chromium | N/A | 0.01-0.35% | ✓ Non-hazardous |
| Nickel | N/A | 0.05% | ✓ Non-hazardous |
| Zinc | N/A | 0.03-0.25% | ✓ Non-hazardous |
| Beryllium | N/A | 0.0003% | ✓ Non-hazardous |
| Gallium | N/A | 0.03% | ✓ Non-hazardous |
| Boron | N/A | 0.05% | ✓ Non-hazardous |
| Vanadium | N/A | 0.15% | ✓ Non-hazardous |
| Zirconium | N/A | 0.1-0.25% | ✓ Non-hazardous |
| Tin | N/A | 0.05% | ✓ Non-hazardous |
Additional Information
See notes for additional minor constituents and maximum allowable concentrations for trace elements.
Composition Notes
Alloy ingredients are listed as percent by weight (maximum or range), except for Aluminum, which is a minimum percent by weight. Rmnd = remainder. See notes for trace elements.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician immediately.
🖐️ Skin Contact
Wash thoroughly with soap and water. Consult a physician if irritation persists.
👁️ Eye Contact
Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician.
🚨 Immediate Medical Attention Required
Consult a physician immediately for inhalation exposure. Consult a physician for eye contact. Consult a physician if skin irritation persists.
Medical Treatment
Provide CPR for persons without pulse or respirations.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use with adequate explosion-proof ventilation. Welding or cutting operations involving beryllium-containing base or filler metals shall be done using local exhaust ventilation.
🧤 Hand Protection
Wear impervious gloves to avoid any skin injury.
👁️ Eye Protection
Welders should use appropriate equipment (e.g. welder's helmet, face shield, filter lens) to prevent eye irritation or flash burns.
😷 Respiratory Protection
Use NIOSH-approved respiratory protection [dust, fume, high efficiency dust/fume mask for lead, or other (organic vapor)] as specified by an Industrial Hygienist or other qualified professional if concentrations exceed the limits. Welding or cutting operations involving beryllium-containing base or filler metals shall be done using airline respirators unless atmospheric tests under the most adverse conditions have established that the workers' exposures is within the acceptable concentrations defined by 29 CFR 1910.1000. In all cases, workers in the immediate vicinity of the welding or cutting operations shall be protected as necessary by local exhaust ventilation or airline respirators.
🦺 Skin/Body Protection
Wear impervious gloves to avoid any skin injury. Adequate protective clothing should be provided to prevent contamination of personal clothing where employees are exposed to beryllium above the PEL or where excessive contamination of clothing with beryllium is possible.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for ALUMINUM WELDING WIRE AND METALLIZING WIRE?
The signal word for this substance is "no signal word".
What is the physical form of ALUMINUM WELDING WIRE AND METALLIZING WIRE?
ALUMINUM WELDING WIRE AND METALLIZING WIRE is a solid appearing as solid .
What is ALUMINUM WELDING WIRE AND METALLIZING WIRE used for?
Welding, Filler Metal, Metallizing, Brazing
What is the melting point of ALUMINUM WELDING WIRE AND METALLIZING WIRE?
The melting point is 970 -1215 F (521 -657 C) and the boiling point is Not applicable.