NextSDS Logo
Safety Data Sheet EN

AQUALON® CELLULOSE GUM (CMC PURIFIED)

CAS 9004-32-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AQUALON® CELLULOSE GUM (CMC PURIFIED)
Chemical Name
sodium carboxymethylcellulose; cellulose, carboxymethyl ether, sodium salt

Regulatory Identifiers

CAS Number
9004-32-4 Check regulations →
02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit.
Skin Irrit.
STOT SE

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

EUH014 May form flammable dust-air mixtures.
EUH208 Static charges generated by emptying package in or near flammable vapors may cause flash fire.
H317 Repeated ingestion may cause an allergic reaction in susceptible individuals.
H317 Repeated or prolonged skin contact may cause allergic dermatitis in susceptible individuals.
H319 May cause mild eye irritation.
H335 Inhalation of dust may cause respiratory tract irritation.
May cause skin irritation by mechanical abrasion.
Surfaces subject to spills may become slippery.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

This product is considered hazardous according to the OSHA Hazard Communication Standard 29CFR1910.1200 due to flammable dust potential. Hercules Incorporated has not determined the safety of this product for parenteral or medical implant uses.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Get medical attention if nasal, throat or lung irritation develops.

Symptoms: nasal, throat or lung irritation

Skin contact

Wash thoroughly with soap and water. Get medical attention if irritation develops or persists.

Symptoms: irritation

Eye contact

Remove contact lenses. Hold eyelids apart. Immediately flush eyes with plenty of low-pressure water for at least 15 minutes. Get medical attention if irritation persists.

Ingestion

No adverse health effects are expected from accidental ingestion of small amounts of this product. For ingestion of large amounts: If conscious, drink one to two glasses of water (8-16 oz.). Do not induce vomiting. Get immediate medical attention. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get immediate medical attention (for ingestion of large amounts).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, dry chemical, foam, carbon dioxide or clean extinguishing agents may be used on fires involving this product.

Instructions

Wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH approved (or equivalent) and full protective gear when fighting fires involving this product.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH approved (or equivalent) and full protective gear when fighting fires involving this product.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate area. Clean up spills immediately. If product is contaminated, scoop into containers, and dispose appropriately. If product is not contaminated, scoop into clean containers for use. In case of accidental spill or release, refer to Section 8, Personal Protective Equipment and General Hygiene Practices.

Cleanup methods

Clean up spills immediately. If product is contaminated, scoop into containers, and dispose appropriately. If product is not contaminated, scoop into clean containers for use.

Materials: containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ground operator and pour material slowly into conductive, grounded chute. Keep container closed when not in use. Avoid emptying package in or near flammable vapors; static charges may cause flash fire.

Storage

Store in a cool, dry, well ventilated area.

Fire prevention

Ground all equipment. Keep away from heat, flame, sparks and other ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation.

Hands

Impervious gloves

Eyes

Safety glasses

Respiratory

If upper respiratory tract irritation occurs, use an approved dust/mist respirator to minimize exposure. Wear approved dust/mist respirator if user operations create dust/mist that causes irritation.

Skin/Body

Appropriate protective clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
1.59
Flammability
---
Evaporation Rate
---
Odor
odorless
Lower Explosive Limit
---
Flash Point
---
Physical State
granular powder
Cloud Point
---
Odor Threshold
---
Softening Point
---
Colour Intensity
---
Voc Content
---
State Under Standard Conditions
---
Freezing Point
---
Solidification Point
---
Vapor Density
---
Bulk Density
---
Solubility
---
Kinematic Viscosity
---
Properties Status
---
Partition Coefficient
---
Molecular Weight
---
Auto Ignition Temperature
---
Crystallisation Point
---
Colour
white to off-white
Ph
---
Form
---
Explosive Limits
---
Decomposition Temperature
440 °F
Vapor Pressure
---
Density
---
Boiling Point
---
Upper Explosive Limit
---
Relative Evaporation Rate
---
Solubility In Fat
---
Physical State Data
solid
Appearance
---
Melting Point
---
Metal Corrosion
---
Solubility In Water
limited by viscosity
Dynamic Viscosity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions.

Hazardous reactions

Not anticipated under normal or recommended handling and storage conditions.

Incompatible

None known

Decomposition

None known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Landfilling in a permitted solid or hazardous waste facility is recommended.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AQUALON® CELLULOSE GUM (CMC PURIFIED)?

The signal word is warning.

What is the physical form of AQUALON® CELLULOSE GUM (CMC PURIFIED)?

AQUALON® CELLULOSE GUM (CMC PURIFIED) is a granular powder with white to off-white color. It has odorless odor.

What are the hazard statements for AQUALON® CELLULOSE GUM (CMC PURIFIED)?

This substance has 8 hazard statements:

  • EUH014: May form flammable dust-air mixtures.
  • EUH208: Static charges generated by emptying package in or near flammable vapors may cause flash fire.
  • H317: Repeated ingestion may cause an allergic reaction in susceptible individuals.
  • H317: Repeated or prolonged skin contact may cause allergic dermatitis in susceptible individuals.
  • H319: May cause mild eye irritation.
  • H335: Inhalation of dust may cause respiratory tract irritation.
  • May cause skin irritation by mechanical abrasion.
  • Surfaces subject to spills may become slippery.