Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries
- Product Code
- 309463
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Ashland
P.O. Box 8619, NL3009 AP, Rotterdam, Netherlands
+31 10 497 5000
Emergency Contacts
Ashland
+1-800-274-5263
Ashland
+1-606-329-5701
local emergency
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium sulphite EC: 231-821-4 | 7757-83-7 | 15 - 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician. In case of shortness of breath, give oxygen.
Take off contaminated clothing and shoes immediately. Wash off immediately with plenty of water.
Flush eyes with water at least 15 minutes. Remove contact lenses.
Symptoms: eye irritation develops or persists
Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Consult a physician if necessary.
Immediate Medical Attention
If symptoms develop, seek medical attention. Get medical attention if eye irritation develops or persists. If symptoms persist, call a physician. Consult a physician if necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
CorrosionX Aviation Aerosol
---
Corrosion inhibitor
---
SP-400™ Corrosion Inhibitor
---
AMMONIUM IRON(III) SULFATE DODECAHYDRATE FOR ANALYSIS EMSURE® ACS,ISO,REAG. PH EUR
CAS: 7783-83-7
Ammonium Hydroxide, ACS
CAS: 1336-21-6
MOTIP ANTI CORROSION PRIMER RED 500 ML
---
3-36® Multi-Purpose Lubricant & Corrosion Inhibitor
---
AMOLIT®
CAS: 1317-65-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below level of overexposure (from known, suspected or apparent adverse effects).
Wear resistant gloves such as: Nitrile rubber
Safety glasses with side-shields
No personal respiratory protective equipment normally required.
Safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries?
The signal word is no signal word.
What is the physical form of Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries?
Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries is a liquid with clear color. It has sulphurous odor.
What is the solubility of Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries?
Water completely miscible
What is the melting point of Amersite™ 10L CORROSION INHIBITOR™ Trademark, Ashland or its subsidiaries, registered in various countries?
The melting point is 0 C and the boiling point is 100,00 C.