Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Atellica CH Conditioner commonly used diagnostic agents..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H318: Causes serious eye damage.
Precautionary Statements
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P305: IF IN EYES:
- P351: Rinse cautiously with water for several minutes.
- P338: Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER or physician.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Siemens Healthcare Diagnostics Limited
manufacturer
Park View, Watchmoor Park, Camberley, Surrey, GU15 3YL United Kingdom
GB
+44 (0) 345 600 1955
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
NHS Direct
0845 4647
GB
In England and Wales
NHS Direct
111
GB
In England and Wales
NHS 24
08454 24 24 24
GB
In Scotland
Poison Control
01 809 2166
IE
In the Republic of Ireland
CHEMTREC
0870-8200418
GB
(UK only)
CHEMTREC
+(353)-19014670
IE
(UK & Ireland)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| citric acid EC: 201-069-1 | 77-92-9 | 10% | ⚠️ Hazardous |
| Alcohols, C11-15-secondary, ethoxylated | 68131-40-8 | 5% | ⚠️ Hazardous |
Composition Notes
See Section 16 for the full text of the H statements declared above. Occupational exposure limits, if available, are listed in Section 8.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Get medical attention immediately. Call a poison center or physician. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
No specific data.
🖐️ Skin Contact
Get medical attention immediately. Call a poison center or physician. Wash contaminated skin with soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Symptoms:
Adverse symptoms may include the following: pain or irritation redness blistering may occur
👁️ Eye Contact
Get medical attention immediately. Call a poison center or physician. Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a physician.
Symptoms:
Adverse symptoms may include the following: pain watering redness
🍽️ Ingestion/Swallowing
Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Chemical burns must be treated promptly by a physician. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
Adverse symptoms may include the following: stomach pains
🚨 Immediate Medical Attention Required
Get medical attention immediately. Call a poison center or physician. Chemical burns must be treated promptly by a physician. If unconscious, place in recovery position and get medical attention immediately. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Medical Treatment
Treat symptomatically. No specific treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
🧤 Hand Protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. Wear suitable gloves tested to EN374. Impervious gloves (e.g. butyl, nitrile, etc.) are recommended if skin contact is possible and for processing operations. Protective gloves must meet the standards in accordance with CEN EN374, ASTM F1001 or international equivalent.
👁️ Eye Protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles and/or face shield. If inhalation hazards exist, a full-face respirator may be required instead. Recommended: safety glasses with side-shields Use eye protection according to EN 166.
😷 Respiratory Protection
Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use.
🦺 Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
🌍 Environmental Exposure Controls
Use appropriate containment to avoid environmental contamination. Keep container closed. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. Dispose of waste in accordance with environmental legislation.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
No.
📦 Proper Shipping Name
Not regulated.
⚠️ Transport Hazard Class
Not regulated.
📋 Packing Group
Not regulated.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Atellica CH Conditioner?
The signal word for this substance is "danger".
What is the physical form of Atellica CH Conditioner?
Atellica CH Conditioner is a liquid. with colourless. color. It has not relevant/applicable due to nature of the product. odor.
What is Atellica CH Conditioner used for?
Diagnostic agents.
What are the hazard statements for Atellica CH Conditioner?
This substance has 1 hazard statements: H318: Causes serious eye damage.
What is the melting point of Atellica CH Conditioner?
The melting point is Not relevant/applicable due to nature of the product. and the boiling point is Not relevant/applicable due to nature of the product..