Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).
- Product Form
- Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).
- Product Code
- BSB 5xxxx and BSB 6xxxx series
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Immunohistochemistry (IHC) for IVD (In-Vitro Diagnostics), RUO (Research Use Only), or ASR (Analyte Specific Reagent)
Uses advised against
Not intended for use in humans or animals
Manufacturers & Suppliers
Bio SB, Inc.
manufacturer
69 Santa Felicia Dr. Santa Barbara, CA 93117, USA
biosb.com
Emergency Contacts
Emergency Contact
+1-805 692 2768
9 AM - 5 PM PST, M-F
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution. | --- | --- | Yes |
| TBS | --- | --- | No |
| Stabilizer proteins | --- | --- | No |
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
Notes
The Full Text for all Hazard Statements are displayed in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of inhalation of spray mist: Move person into fresh air and keep at rest. Get medical attention if any discomfort continues. If breathing stops, provide artificial respiration. Get medical attention immediately!
Symptoms: May cause coughing or mild irritation.
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after washing.
Symptoms: Prolonged skin contact may cause redness and irritation.
Promptly wash eyes with plenty of water while lifting the eye lids. Make sure to remove any contact lenses from the eyes before rinsing. Continue to rinse for at least 15 minutes. Obtain medical attention and bring these instructions.
Symptoms: May cause temporary eye irritation.
Immediately rinse mouth and drink plenty of water (200-300 ml). DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Get medical attention.
Symptoms: May cause discomfort if swallowed.
Immediate Medical Attention
No specific first aid measures noted. Treat Symptomatically.
Medical Treatment
Treat Symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Products Containing Antibody Diluent with Background Reducing Components
---
Reaction Buffer Concentrate (10X)
---
TRIS (1.0M Tris HCl pH 7.4)
---
Primary Antibody Diluent (Phosphate, Green)
---
Polyclonal Rabbit Antibody Solution
---
Aquagent, standard solution 0,1%
UFI: VPC0-R05P-K000-S2R8
EDTA DISODIUM SALT 0.5M (1N) STANDARDIZED SOLUTION
UFI: N6UM-9QA6-EX3G-1VTJ
Tetra-n-butylammonium hydroxide solution in 2-propanol/methanol for titrations in nonaqueous media c[(C₄H₉)₄NOH] = 0.1 mol/l (0.1 N) Titripur® Reag. USP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe occupational exposure limits and minimize the risk of inhalation of spray.
Use suitable protective gloves if risk of skin contact. The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. Nitrile gloves are recommended, but be aware that the liquid may penetrate the gloves. Not suitable for permanent contact. Frequent change is advisable. Latex or Nitrile gloves; thickness 0.11 mm, ASTM F1671, DIN EN 455 or equivalent; AQL 1.5.
Wear safety goggles or face shield. DIN 166 or equivalent.
No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupational exposure limit.
Wear appropriate clothing to prevent any possibility of skin contact. Wear apron or protective clothing in case of contact. Wash contaminated clothing before reuse.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- Not applicable.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).?
The signal word is no signal word.
What is the solubility of Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).?
Soluble in water.
What is Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%). used for?
Immunohistochemistry (IHC) for IVD (In-Vitro Diagnostics), RUO (Research Use Only), or ASR (Analyte Specific Reagent)
What are the hazard statements for Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of Concentrated and prediluted solutions of unconjugated and conjugated monoclonal or polyclonal antibodies in aqueous Tris-base antibody stabilization solution (NaN 3 < 0.1%).?
The melting point is ~ 0C and the boiling point is <100 @ 760 mm Hg.