Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MONALITE® M1A
- Product Form
- Self-supporting calcium silicate board
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
High temperature insulation
Manufacturers & Suppliers
Promat International NV
manufacturer
Bormstraat 24, 2830 Tisselt BELGIUM
Emergency Contacts
Emergency Contact
+32 15 71 81 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This article is classified as not hazardous.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Wollastonite EC: 237-772-5 | 13983-17-0 | --- | No |
| Quartz (SiO2) EC: 238-878-4 | 14808-60-7 | --- | No |
| Crystalline calcium silicate hydrate EC: 215-710-8 | 1344-95-2 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and drink water.
Rinse the skin with water.
Do not rub the eye. Rinse the eye out with plenty of clean water for at least 15 minutes. If eye irritation or inflammation persists, seek medical advice.
Drink water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing media can be used.
Nothing to report.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Shovel up small pieces.
Prevent spread of dust.
Dampen down any dust before putting into appropriate skips.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Dust, generated during machining and processing must be exhausted and the regulatory occupational exposure limits (workplace exposure limits in UK) for total and respirable dust and respirable quartz dust must be respected. Use always respiratory protective equipment when exposures are likely or can be foreseen to exceed the Occupational Exposure Limits or Workplace Exposure Limits in UK (refer to local regulations). Collect dust with a vacuum cleaner or soak with water before sweeping up.
Store in dry, covered and frost proof area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure vacuum dust exhaust with correct filter when using motorised machining tools.
Use working clothes and gloves to protect against mechanical injury and direct skin contact.
Use safety glasses whenever tools are used and dusts are produced.
Avoid breathing dusts. Use appropriate respiratory equipment when exposures are likely or can be foreseen to exceed the Occupational Exposure Limits or Workplace Exposure Limits for the UK (e.g. for exposures up to 10 times the OEL (WEL) use at least a P2 type duct mask. For higher exposure, use a P3 type mask).
Use working clothes and gloves to protect against mechanical injury and direct skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage, handling and use.
Stable under normal conditions.
None.
None known.
Strong acids.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Handle as construction industry waste.
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Symbol(s) : None. R Phrase(s) : None. S Phrase(s) : None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MONALITE® M1A?
The signal word is no signal word.
What is the physical form of MONALITE® M1A?
MONALITE® M1A is a solid. appearing as board (solid) with white. color. It has none. odor.
What is MONALITE® M1A used for?
High temperature insulation