Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR
- Product Code
- 170326
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt * Germany
+49 6151 72-0
www.merck-chemicals.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NITRIC ACID 26 - <65% EC: 231-714-2 | 7697-37-2 | 1 - 5% | Yes |
Notes
A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
wash off with plenty of water. Remove contaminated clothing.
rinse out with plenty of water. Call in ophthalmologist.
immediately make victim drink water (two glasses at most). Consult a physician.
Symptoms: methaemoglobinaemia after the uptake of large quantities (for nitrites/nitrates). Nausea and vomiting after swallowing (for soluble iron compounds). Cardiovascular disorders and toxic effect on liver and kidneys after the absorption of large quantities (for soluble iron compounds).
Immediate Medical Attention
No information available.
Medical Treatment
Call in ophthalmologist. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Iron ICP standard traceable to SRM from NIST, Fe(NO) in HNO 10% 10000 mg/l Fe CertiPUR
---
Mercury ICP standard traceable to SRM from NIST Hg(NO) in HNO 10% 1000 mg/l Hg Certipur
---
Strontium ICP standard traceable to SRM from NIST Sr(NO) in HNO 2-3% 1000 mg/l Sr CertiPUR
---
Copper ICP standard traceable to SRM from NIST Cu(NO) in HNO 2-3% 10000 mg/l Cu CertiPUR
---
Copper ICP standard traceable to SRM from NIST Cu(NO) in HNO 2-3% 1000 mg/l Cu CertiPUR
---
Vanadium ICP standard traceable to SRM from NIST NHVO in HNO 2-3% 1000 mg/l V CertiPUR
---
Potassium ICP standard traceable to SRM from NIST KNO in HNO 2-3% 1000 mg/l K CertiPUR
---
Vanadium ICP standard traceable to SRM from NIST NHVO in HNO 15% 10000 mg/l V CertiPUR
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
full contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min; splash contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when vapours/aerosols are generated. Recommended Filter type: filter E-(P2). The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
No special precautionary measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (CONT. NITRIC ACID SOLUTION)
- Transport Class
- 8
- Packing Group
- III
yes
yes
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR?
The signal word is warning.
What is the physical form of Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR?
Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR is a liquid with colourless color. It has odourless odor.
What is Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR used for?
Reagent for analysis
What are the hazard statements for Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of Iron ICP standard traceable to SRM from NIST Fe(NO) in HNO 23% 1000 mg/l Fe CertiPUR?
The melting point is No information available. and the boiling point is No information available..