Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NEVER SEEZ REGULAR GRADE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
lubricant.
Uses advised against
No information available
Manufacturers & Suppliers
Bostik Inc.
manufacturer
11320 W. Watertown Plank Road, Wauwatosa, Wisconsin 53226 USA
+1 (800) 843-0844
Emergency Contacts
Emergency Contact
1-800-227-0332
Emergency Contact
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/ attention.
In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. If eye irritation persists: Get medical advice/attention.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, CO2, water spray or regular foam.
Do not scatter spilled material with high pressure water streams.
Some may burn but none ignite readily.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Do not touch or walk through spilled material. Stop leak if you can do it without risk.
Prevent entry into waterways, sewers, basements or confined areas.
Take up with sand or other non-combustible absorbent material and place into containers for later disposal. With clean shovel place material into clean, dry container and cover loosely; move containers from spill area. Clean contaminated surface thoroughly.
Materials: sand or other non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product. Ensure adequate ventilation, especially in confined areas. Wash hands thoroughly after handling.
Keep container tightly closed in a dry and well-ventilated place.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems.
Wear suitable chemical resistant gloves. The selection of suitable gloves does not only depend on the material, but also on further marks of quality and various manufacturers.
Wear safety glasses with side shields (or goggles).
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.
Wear suitable chemical resistant gloves.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
None under normal use conditions.
None under normal processing.
Extremes of temperature and direct sunlight.
None known based on information supplied.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste identification and disposal methods in compliance with applicable regulations
It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste identification and disposal methods in compliance with applicable regulations
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Copper, Zinc oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NEVER SEEZ REGULAR GRADE?
The signal word is no signal word.
What is the physical form of NEVER SEEZ REGULAR GRADE?
NEVER SEEZ REGULAR GRADE is a liquid appearing as paste with gray color. It has petroleum distillates odor.
What is NEVER SEEZ REGULAR GRADE used for?
lubricant.
What is the melting point of NEVER SEEZ REGULAR GRADE?
The melting point is No information available and the boiling point is No information available.