Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Never-Seez Regular Grade Cmpd.
Regulatory Identifiers
- CAS Number
- Mixture Check regulations →
Manufacturers & Suppliers
Bostik, Inc.
manufacturer
211 Boston Street Middleton, MA 01949 USA
1-978-777-0100
Emergency Contacts
Bostik, Inc.
1-800-227-0332
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person to non-contaminated air. If the affected person is not breathing, apply artificial respiration.
For minor exposures, wash thoroughly with soap and clean water. In situations involving considerable skin contact, place the contaminated person in a deluge shower for at least 15 minutes. Remove contaminated clothing to prevent further skin exposure and dispose of properly.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.
Do not induce vomiting. If person is conscious and can swallow, immediately give two glasses of water. Do not give anything by mouth to an unconscious or convulsing person.
Immediate Medical Attention
Seek medical attention at once (eye contact). Get medical attention if irritation persists (skin contact). Seek medical attention (inhalation). Seek immediate medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, carbon dioxide, foam, or water spray (fog).
Product may burn and produce toxic gases in a fire.
Firefighters should wear full protective clothing including self contained breathing apparatus.
Firefighter Protection
Firefighters should wear full protective clothing including self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Appropriate safety measures and protective equipment should be used. See Section 8. Do not discharge to lakes, streams, ponds, or sewers. Dispose of in compliance with local, state, and federal regulations.
Prevent product from entering sewers and waterways.
Scrape up grease and deposit into appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear appropriate protective equipment to avoid contact with skin and eyes. See Section 8.
Store in a clean, dry area. Keep containers closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation is not normally required.
Wear protective impervious gloves to minimize skin exposure.
Wear safety glasses with side shields.
Not normally needed. Special applications may necessitate the use of more stringent respiratory protection equipment. When dusts or thermal processing fumes are generated and ventilation is not sufficient to effectively remove them, appropriate NIOSH/MSHA approved respiratory protection must be provided.
Work clothing sufficient to prevent all skin contact should be worn, such as coveralls and long sleeves.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Will not occur.
If product is burned hazardous gases such as oxides of carbon and nitrogen and various hydrocarbons may be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally Hazardous Substances, Liquid, N.O.S., (COPPER)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Never-Seez Regular Grade Cmpd.?
The signal word is warning.
What is the physical form of Never-Seez Regular Grade Cmpd.?
Never-Seez Regular Grade Cmpd. is a paste with silver - gray color. It has grease like odor.
What are the hazard statements for Never-Seez Regular Grade Cmpd.?
This substance has 9 hazard statements:
- EUH014: Irritating fumes and gases may be released upon thermal processing or during combustion.
- H303: Ingestion may cause gastrointestinal tract discomfort or damage.
- H315: Extended contact with this material may cause irritation to the skin, eyes, and mucous membranes.
- H315: This product may cause irritation to the skin.
- H315: Prolonged and/or repeated skin contact with this product may cause irritation/dermatitis.
- H319: This product may cause irritation to the eyes.
- H335: Fumes released during thermal processing may irritate respiratory system, skin and eyes.
- Primary Routes of Exposure: eyes, skin, and inhalation.
- Target organs: Skin.