Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Manufacturers & Suppliers
Bison International
manufacturer
Dr.A.F.Philipsstraat 9 NL-4462 EW Goes PO Box 160 NL-4460 AD Goes
+31 88 3235700
Emergency Contacts
National Poisons Information Centre
+353 (1) 809 2166
8.00 a.m. to 10.00 p.m. 7 days a week
Emergency Contact
+353 (1) 809 2566
24 hour service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. No special measures required.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
GRF UNI Durapipe PVC -100 BO 250ML -U Solvent Cement *24 ENDE
---
DURAPIPE AIRLINE EXTRA BOT 500ML Durapipe Air-line XTRA Solvent Cement
---
PVC Regular Clear Cement
---
DGT® SolventGlue EC.7
---
Elevate EPDM Solvent Free Bonding Adhesive
---
DGT® SolventGlue EC.00
---
DGT SolventGlue® HYBRID LS-ST
UFI: 8G20-N02D-Y009-UWCG
LUBRIZOL® PV2501
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Recommended thickness of the material: > 0,12 mm (Butyl rubber, BR, Nitrile rubber, NBR) and > 0,7 mm. For the mixture of chemicals mentioned below the penetration time has to be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1). For the mixture of chemicals mentioned below the penetration time has to be at least 120 minutes (Permeation according to EN 374 Part 3: Level 4).
Tightly sealed goggles. Goggles recommended during refilling.
Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter A.
Solvent resistant protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement?
The signal word is danger.
What is the physical form of Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement?
Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement is a fluid appearing as fluid with according to product specification color. It has characteristic odor.
What is the solubility of Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement?
Not miscible or difficult to mix.
What is Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement used for?
Adhesive
What are the hazard statements for Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Durapipe RH PVC GRF UNI-100 XT BO 1L -U Solvent Cement?
The melting point is Undetermined. and the boiling point is 79-80.5 C.