Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYTETRAFLUOROETHYLENE
- Chemical Name
- POLYTETRAFLUOROETHYLENE
Regulatory Identifiers
- CAS Number
- 9002-84-0 Check regulations →
Manufacturers & Suppliers
GAPI s.r.l.
manufacturer
via Marconi 108, I 24060 Castelli Calepio (BG), ITALY
+39 035 84 70 84
http://www.gapigroup.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
PTFE (POLYTETRAFLUOROETHYLENE)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PTFE (POLYTETRAFLUOROETHYLENE) | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No specific intervention is indicated as the compound is not likely to be hazardous by inhalation. Consult the physician if necessary. If exposed to fumes from over heating or combustion, move to fresh air. Consult the physician if symptoms persist.
Symptoms: Polymer fume fever, a temporary flu-like condition with fever chills, nausea, shortness of breath, chest tightness, muscle or joint ache.
The compound is not likely to be hazardous by skin contact, but clean sing the skin after use is advisable. If molten polymer get son skin, cool rapidly with cold water. Do not attempt to peel polymer from skin. Obtain medical treatment for thermal burn.
Symptoms: Irritation, pain or blurred vision may result.
In case of contact, immediately flush eyes with plenty of water. Call a physician
Symptoms: Irritation, pain or blurred vision may result.
No specific intervention is indicated as compound is not likely to be hazardous by ingestion. Obtain medical attention if necessary.
Symptoms: No toxic.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for surrounding materials/equipment.
If a flame is applied to the material it will ignite but if the flame is removed then combustion ceases.
Firefighter Protection
Wear self-contained apparatus. Wear full protective equipment (antacid).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No risk.
Related Products
Similar products with comparable safety profiles
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE
CAS: 76-13-1
Chloropentafluoroethane
CAS: 76-15-3
1,2-Dichlorotetrafluoroethane
CAS: 76-14-2
Fluoromethyl 1,1,1,3,3-hexafluoroisopropylether
CAS: 28523-86-6
1-Chloro-1-fluoroethylene
---
2-Chloro-1,1,2-trifluoroethyl difluoromethylether
CAS: 13838-16-9
1,1,2-Trichlorotrifluoroethane
---
1,1,2-Trichlorotrifluoroethane
CAS: 76-13-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Usual protective clothing must be worn. Avoid to use material at high temperature (280°C) and care should be taken to prevent inhalation of fume. When using do not smoke.
Extra care should be taken to prevent burns from contact with hot material, contact with hot surface and with naked flames.
When using do not smoke.
When using do not smoke. Extra care should be taken to prevent burns from contact with hot material, contact with hot surface and with naked flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local ventilation exhaust to completely remove vapours and fumes liberated during processing from the work area.
Wear safety glasses. Wear coverall chemical splash goggles and face shield when possible. If exsist for eye and face contact to splashing or spraying of molten material.
Wear heat resistant clothing and footwear.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal temperatures and storage conditions.
heating up 350℃, contact with flame shot material, contact with hot surface and naked
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Treatment, storage, transportation, and disposal must be in accordance with applicable federal, state/provincial, and local regulation.
If possible to recycle is suggested.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
15.1 Regulation CEE, 15.2 Italian Regulation
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYTETRAFLUOROETHYLENE?
The signal word is no signal word.
What is the physical form of POLYTETRAFLUOROETHYLENE?
POLYTETRAFLUOROETHYLENE is a solid tubing .
What is the solubility of POLYTETRAFLUOROETHYLENE?
Not in water or in organic solvent
What is the melting point of POLYTETRAFLUOROETHYLENE?
The melting point is 327/335℃ .