Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
Kaiflex Reiniger / Cleaner commonly used for cleaning.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P243: Take action to prevent static discharges.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264: Wash hands thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing.
- IF ON SKIN: Wash with plenty of soap and water.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P314: Get medical advice/attention if you feel unwell.
- If eye irritation persists: Get medical advice/attention.
- In case of fire: Use extinguishing powder or sand to extinguish.
- Store in a well-ventilated place. Keep container tightly closed.
- P501: Dispose of contents/container to industrial incineration plant.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Kaimann GmbH
undefined
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesGeneral Composition
Solvents/Thinner
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 50-100% | ⚠️ Hazardous |
| butanone EC: 201-159-0 | 78-93-3 | 12.5-20% | ⚠️ Hazardous |
| hydrocarbons, C7, n-alkanes EC: 927-510-4 | 64742-49-0 | 2.5-5% | ⚠️ Hazardous |
| Hydrocarbons, C6, isoalkanes, <5% n-hexane EC: 931-254-9 | 92045-53-9 | 2.5-5% | ⚠️ Hazardous |
Additional Information
Full text of classification: see section 16
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
🖐️ Skin Contact
Change contaminated, saturated clothing.After contact clean skin thoroughly with water and soap or use appropriate cleanser.If skin irritation occurs: Get medical advice/attention.Do not use solvents or thinners.
Symptoms:
If skin irritation occurs
👁️ Eye Contact
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
🍽️ Ingestion/Swallowing
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
🚨 Immediate Medical Attention Required
Seek medical advice immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values, a suitable respiratory protection must be used.
🧤 Hand Protection
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374 Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
👁️ Eye Protection
Wear closely fitting protective glasses in case of splashes.
😷 Respiratory Protection
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number. Suitable respiratory protection apparatus: Respiratory protection is required for not sufficiently ventilated working places and during the spraying processing.
🦺 Skin/Body Protection
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
🌍 Environmental Exposure Controls
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 1993
📦 Proper Shipping Name
Flammable liquid, n.o.s.
⚠️ Transport Hazard Class
3
📋 Packing Group
II
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Kaiflex Reiniger / Cleaner?
The signal word for this substance is "danger".
What is the physical form of Kaiflex Reiniger / Cleaner?
Kaiflex Reiniger / Cleaner is a liquid with refer to label color. It has characteristic odor.
What is Kaiflex Reiniger / Cleaner used for?
for cleaning
What are the hazard statements for Kaiflex Reiniger / Cleaner?
This substance has 4 hazard statements: H225: Highly flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Kaiflex Reiniger / Cleaner?
The melting point is -86 C and the boiling point is not determined.