Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 327-SEL
- Product Code
- 327-SEL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Fluxes for soft soldering
Uses advised against
any non-intended use.
Manufacturers & Suppliers
Cobar Europe BV
manufacturer
Aluminiumstraat 2, 4823 AL Breda
+31 76 5445566
Balver Zinn Josef Jost GmbH & Co. KG
Blintroper Weg 11, D-58802 Balve
+49 2375 915-0
Emergency Contacts
Emergency Contact
+49 (0) 700 24 112 112
Emergency Contact
011 49 700 24 112 112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Product does not contain listed SVHC substances > 0,1 % according to Regulation (EC) No. 1907/2006 Article 59 (REACH)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 40 - 45% | Yes |
| N/A | --- | 35 - 45% | Yes |
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 1 - 5% | Yes |
| N/A | --- | 1 - 5% | Yes |
| N/A | --- | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. In case of respiratory tract irritation, consult a physician.
Take off immediately all contaminated clothing. Wash with plenty of water. In case of skin irritation, seek medical treatment.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Rinse mouth thoroughly with water. Let water be drunken in little sips ( dilution effect). Do NOT induce vomiting. Never give anything by mouth to an unconscious person or a person with cramps. In all cases of doubt, or when symptoms persist, seek medical advice.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Wear suitable gloves. (BS EN 374) Suitable material: Butyl rubber. Thickness of glove material: 0,5 mm penetration time (maximum wearing period): 120 min. In the case of wanting to use the gloves again, clean them before taking off and air them well. Before using check leak tightness / impermeability. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Recommended eye protection brand: Tightly sealed safety glasses. (BS/EN 166)
With correct and proper use, and under normal conditions, breathing protection is not required. Respiratory protection necessary at: Exceeding exposure limit values Insufficient ventilation. Suitable respiratory protective equipment: gas filtering equipment (EN 141). Type: A The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used.
Wear suitable protective clothing. Minimum standard for preventive measures while handling with working materials are specified in the TRGS 500 (D).
Do not allow uncontrolled discharge of product into the environment. This material and its container must be disposed of in a safe way.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1987
- Shipping Name
- ALCOHOLS, N.O.S. (Ethanol. / Isopropyl alcohol.)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 327-SEL?
The signal word is danger.
What is the physical form of 327-SEL?
327-SEL is a liquid. with yellow color. It has alcoholic. odor.
What is the solubility of 327-SEL?
not determined
What is 327-SEL used for?
Fluxes for soft soldering
What are the hazard statements for 327-SEL?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
What is the melting point of 327-SEL?
The melting point is not applicable and the boiling point is Ethanol: 78.