NextSDS Logo
Safety Data Sheet EN

HENRY SCHEIN MAXIMA HP Spray

CAS Mixture

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HENRY SCHEIN MAXIMA HP Spray
Product Code
SP-501049
Chemical Name
Mixture

Regulatory Identifiers

CAS Number
Mixture Check regulations →

Identified Uses

Spray lubricant

Manufacturers & Suppliers

S

Spray Products Corporation

manufacturer

P.O. Box 737, Norristown, PA 19404

(610) 277-1010

Emergency Contacts

CHEMTREC

1-800-424-9300

24 hr.

CHEMTREC

1 (703) 527-3887

24 hr.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1
Liquefied gas
Asp. Tox. Cat. 1
Simple Asphyxiant

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely flammable aerosol.
H280 Contains gas under pressure; may explode if heated.
H304 May be fatal if swallowed and enters airways.
May displace oxygen and cause rapid suffocation.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
Avoid breathing spray.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
White mineral oil 8042-47-5 40 - 50% Yes
Propane 74-98-6 25 - 35% Yes
Butane 106-97-8 20 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air. If breathing is labored, administer oxygen. If symptoms develop, obtain medical attention.

Skin contact

Wash affected skin with soap and water. If symptoms develop, obtain medical attention.

Eye contact

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If symptoms occur obtain medical attention.

Ingestion

Do not give anything by mouth to an unconscious person. Seek medical treatment. Do NOT induce vomiting.

Immediate Medical Attention

IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

Medical Treatment

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide, dry chemical, foam or water spray

Unsuitable media

water jet

Specific hazards

Highly flammable vapor (flash point below 23°C).

Instructions

Keep containers cool by spraying with water if exposed to fire.

Firefighter Protection

A self contained breathing apparatus and suitable protective clothing should be worn in fire conditions.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Avoid contact with skin and eyes. Avoid breathing vapours.

Environmental

Prevent liquid entering sewers, basements and work pits.

Cleanup methods

Transfer to a container for disposal or recovery.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Wash hands thoroughly after handling. Use product in a well-ventilated area only.

Storage

Store locked up. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F.

Hygiene

Wash hands thoroughly after handling.

Fire prevention

Keep away from heat/sparks/open flames/hot surfaces. – No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation to ensure that the occupational exposure limit is not exceeded.

Hands

Wear suitable gloves if prolonged skin contact is likely (Nitrile rubber)

Eyes

Wear protective eyewear (goggles, face shield, or safety glasses).

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment.

Skin/Body

Wear suitable gloves if prolonged skin contact is likely (Nitrile rubber)

Environmental

None known

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Voc Content
---
Ph
Not available
Lower Explosive Limit
2.1% v/v (Propane)
Colour
Colorless
Appearance
Aerosol spray
Relative Density
---
Form
---
Solubility In Water
Not available
Cloud Point
---
Flammability
Extremely flammable
Colour Intensity
---
Molecular Weight
---
Flash Point
-104 (Propane) °C
State Under Standard Conditions
---
Solubility
Not available
Melting Point
Not available
Evaporation Rate
Not available
Partition Coefficient
Not available
Solidification Point
---
Dynamic Viscosity
---
Auto Ignition Temperature
450 (Propane) °C
Boiling Point
Not available
Physical State
Aerosol spray
Kinematic Viscosity
<20 cSt @ 40°C
Density
Not available
Explosive Limits
---
Metal Corrosion
---
Solubility In Fat
---
Freezing Point
Not available
Physical State Data
aerosol
Odor
Petroleum-like
Upper Explosive Limit
9.5% v/v (Propane)
Crystallisation Point
---
Properties Status
---
Decomposition Temperature
Not available
Vapor Pressure
ca. 95 x 10⁴ (Propane) Pascal
Softening Point
---
Odor Threshold
Not available
Vapor Density
ca. 1.56 @ 0°C (Propane)
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable.

Reactivity

Stable under normal conditions.

Hazardous reactions

None anticipated.

Avoid

Avoid contact with heat and ignition sources.

Incompatible

Strong oxidizing agents.

Decomposition

Forms oxides of carbon or soot under fire conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal should be in accordance with local, state or national legislation. Consult an accredited waste disposal contractor or the local authority for advice.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
2.1
Packing Group
Not applicable
IMDG

None assigned

IATA

None assigned

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HENRY SCHEIN MAXIMA HP Spray?

The signal word is danger.

What is the physical form of HENRY SCHEIN MAXIMA HP Spray?

HENRY SCHEIN MAXIMA HP Spray is a aerosol spray appearing as aerosol spray with colorless color. It has petroleum-like odor.

What is the solubility of HENRY SCHEIN MAXIMA HP Spray?

Not available

What is HENRY SCHEIN MAXIMA HP Spray used for?

Spray lubricant

What are the hazard statements for HENRY SCHEIN MAXIMA HP Spray?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol.
  • H280: Contains gas under pressure; may explode if heated.
  • H304: May be fatal if swallowed and enters airways.
  • May displace oxygen and cause rapid suffocation.

What is the melting point of HENRY SCHEIN MAXIMA HP Spray?

The melting point is Not available and the boiling point is Not available.