Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MediCult IVM® System
- Product Code
- 8221
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For pre-incubation and maturing of immature oocytes.
Manufacturers & Suppliers
ORIGIO a/s
manufacturer
Knardrupvej 2, DK-2760 Måløv
+45 46 79 02 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | --- | 90% | No |
| Sodium Chloride | 7647-14-5 | 1% | No |
| Human Serum Albumin | --- | 1% | No |
| Sodium Bicarbonate | 144-55-8 | 1% | No |
| Glucose | 50-99-7 | 0.1% | No |
| Potassium Chloride | 7447-40-7 | 0.1% | No |
| Calcium Chloride | 10043-52-4 | 0.1% | No |
| Sodium Phosphate monobasic | 10049-21-5 | 0.1% | No |
| Magnesium Sulphate | 7487-88-9 | 0.1% | No |
| Sodium Pyruvate | 113-24-6 | 0.1% | No |
| SSR® (Synthetic Serum Replacement)* | --- | 0.01% | No |
| Gentamicin Sulphate | 1405-41-0 | 0.001% | No |
| Phenol Red | 34487-61-1 | 0.001% | No |
| Water | --- | 90% | No |
| Sodium Chloride | 7647-14-7 | 1% | No |
| Sodium Bicarbonate | 144-55-8 | 1% | No |
| Amino Acids | --- | 0.1% | No |
| Glucose | 50-99-7 | 0.1% | No |
| Potassium Chloride | 7447-40-7 | 0.1% | No |
| Calcium Chloride | 10043-52-4 | 0.1% | No |
| Sodium Phosphate monobasic | 10049-21-5 | 0.1% | No |
| Nucleotides | --- | 0.01% | No |
| Magnesium Sulphate | 7487-88-9 | 0.01% | No |
| Sodium Pyruvate | 113-24-6 | 0.01% | No |
| Sodium Acetate | 127-09-3 | 0.01% | No |
| Cholesterol | 57-88-5 | 0.01% | No |
| Iron(III) nitrate | 7782-61-8 | 0.01% | No |
| Vitamins | --- | 0.01% | No |
| Gentamicin Sulphate | 1405-41-0 | 0.01% | No |
| Phenol Red | 34487-61-1 | 0.01% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Not a likely source of exposure.
Wash with soap and water after each contact.
Flush with copious amounts of water. Assure adequate flushing by separating the eyelids with fingers. If irritation develops, consult a physician.
Wash out mouth with water. If swallowed consult a physician.
Immediate Medical Attention
If swallowed consult a physician. If irritation develops, consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, foam, carbon dioxide or water spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb on suitable absorbent, such as paper tissue.
Materials: paper tissue
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in original container at 2-8°C, protected from light. Do not freeze.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not expected to occur
None known
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MediCult IVM® System?
The signal word is no signal word.
What is the physical form of MediCult IVM® System?
MediCult IVM® System is a liquid appearing as clear red liquid . It has odourless odor.
What is MediCult IVM® System used for?
For pre-incubation and maturing of immature oocytes.