Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tridol®C6 S3
- Product Form
- Aqueous Film Forming Foam Concentrate (AFFF)
- Product Code
- AMS#080
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Firefighting Foam Concentrate
Uses advised against
See product data sheet
Manufacturers & Suppliers
Angus Fire
manufacturer
141 Junny Street, Angier, NC 27501-8625
(919) 331-6100
Emergency Contacts
Infotrac
(800) 535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move victim to fresh air.
Wash skin thoroughly with soap and water.
Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open.
Dilute by drinking large quantities of water and obtain medical attention.
Immediate Medical Attention
Obtain medical attention if soreness or redness persists (eyes). Obtain medical attention if irritation persists (skin). Obtain medical attention (ingestion). Obtain medical attention immediately for any breathing difficulty (inhalation).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
This preparation is used as an extinguishing agent and therefore is not a problem when trying to control a fire. Use extinguishing agent appropriate to other materials involved.
None known
Firefighter Protection
Wear full protective clothing and self-contained breathing apparatus as appropriate for specific fire conditions.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate protective clothing. Prevent skin and eye contact.
Prevent foam concentrate or foam solution from entering ground water, surface water, or storm drains.
transfer into suitable containers for recovery or disposal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear appropriate protective clothing. Prevent skin and eye contact.
Store in original containers between 35°F and 120°F (2°C and 49°C). Storage area should be: - cool - dry - well ventilated - under cover - out of direct sunlight
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with adequate ventilation. If this product is used in a pressurized system, there should be local procedures for the selection, training, inspection and maintenance of this equipment. When used in large volumes, use local exhaust ventilation.
Butyl rubber gloves
Chemical goggles or safety glasses with side shields.
Wear respiratory protection if there is a risk of exposure to high vapor concentrations, aerosols or if applied to hot surfaces. A NIOSH approved full face respirator may be worn. The specific respirator selected must be based on the airborne concentration found in the workplace and must not exceed the working limits of the respirator.
Normal work wear.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available.
Hazardous polymerization will not occur.
Contact with incompatible materials
Water reactive materials – alkali metals – electrically energized equipment
Oxides of carbon – sulfur oxides – hydrogen fluoride – nitrogen oxides – sodium oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tridol®C6 S3?
The signal word is warning.
What is the physical form of Tridol®C6 S3?
Tridol®C6 S3 is a liquid with pale yellow color. It has mild, pleasant odor.
What is Tridol®C6 S3 used for?
Firefighting Foam Concentrate
What are the hazard statements for Tridol®C6 S3?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Tridol®C6 S3?
The melting point is No data available and the boiling point is No data available.