Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- COMMANDANT CLEANER NR. 4
- Product Code
- C40, C45
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer product. Car maintenance.
Manufacturers & Suppliers
Turtle Wax Benelux B.V.
national supplier
Wageningselaan 6, 3903 LA Veenendaal, The Netherlands
+31 318 54 65 65
http://www.valma.eu
Emergency Contacts
NL
+31 318 54 65 65
During office hours only
National Poisons Information Service
+44-844 892 0111
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-11, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 919-857-5 | 64742-48-9 | 25 - 50% | Yes |
| Quartz (SiO2) EC: 238-878-4 | 14808-60-7 | 10 - 25% | No |
| 2,2',2''-Nitrilotriethanol EC: 203-049-8 | 102-71-6 | 1 - 5% | No |
| Ammonia, aqueous solution EC: 215-647-6 | 1336-21-6 | 0.1 - 1% | Yes |
| Kieselguhr EC: 612-383-7 | 61790-53-2 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move victim into fresh air. Consult a doctor if victim feels unwell.
Symptoms: May cause headache, drowsiness, dizziness and a feeling of sickness.
Take off contaminated clothing. Wash off skin with plenty of water and soap before product dries up. Consult a doctor if irritation persists.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Wash out with (lukewarm) water for at least 15 minutes. Remove contact lenses. Consult a doctor if irritation persists.
Symptoms: May cause stinging of eyes and redness.
Do not induce vomiting. Give nothing to drink. Do rinse the mouth. Never give anything by mouth to an unconscious person. Consult a doctor immediately.
Symptoms: May cause a feeling of sickness, vomiting and diarrhoea. May cause lung damage, sore throat and lack of breath.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbondioxide (CO2). Foam. Dry chemical. Water fog.
Water jet.
None known.
Firefighter Protection
Use adequate respiratory equipment in case of insufficient ventilation.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clean up spills immediately. Avoid contact with spilled or released material.
Large spills: contain with dike.
Avoid release of product into sewers, surface water and/or ground water.
Collect spilled material in containers. Absorb residues in sand or other inert material. Wash away remainder with plenty of water and soap.
Materials: sand or other inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good occupational hygiene and safety practices in well-ventilated areas. Do not breathe vapour. Avoid contact with skin and eyes.
Keep frost-free, in a cool, dry and well-ventilated place (< 35 °C). Keep away from oxidizing agents. Protect from sunlight.
Handle in accordance with good occupational hygiene and safety practices.
Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Ensure electrical continuity by bonding and grounding (earthing) all equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas. Comply with standard precautionary measures for working with chemicals.
Under normal conditions of use specific gloves are not required. Wear special gloves in case of frequent or prolonged use and in case of large scale exposure. Suitable material: nitril. ± 0,5 mm Indication of permeation breakthrough time: not known.
Wear appropriate safety glasses when there is danger of possible eye contact.
Take care of sufficient ventilation. Wear suitable respiratory protection in case of large scale exposure. Suitable: gas filter type AK (brown/green), class I or higher on e.g. a facemask in accordance with EN 140.
Use of specific protective industrial clothing is not required under normal conditions of use. In case of large scale exposure wear suitable protective clothing, overalls or suit, and similar boots. Suitable material: nitril. Indication of permeation breakthrough time: not known.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No other hazardous reactions known.
See section 7.
Keep away from oxidizing agents.
Not known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for COMMANDANT CLEANER NR. 4?
The signal word is warning.
What is the physical form of COMMANDANT CLEANER NR. 4?
COMMANDANT CLEANER NR. 4 is a liquid. appearing as liquid. with beige color. It has characteristic. odor.
What is COMMANDANT CLEANER NR. 4 used for?
SU21 Consumer product. Car maintenance.
What are the hazard statements for COMMANDANT CLEANER NR. 4?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
What is the melting point of COMMANDANT CLEANER NR. 4?
The melting point is < 0 °C and the boiling point is 100 °C.