Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water based inks for textiles.
Manufacturers & Suppliers
Farbenpunkt GmbH
manufacturer
Zum Kaisergarten 53, D-54497 Morbach, Germany
+49 6533 95 900 17
Emergency Contacts
Antigif Centre Belgium
+32 2 264 96 30
24/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-Benzisothiazol-3(2H)-one | 2634-33-5 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If eye, nose or throat irritation from mist develops, move to fresh air until symptoms disappear.
Remove all contaminated clothing immediately and wash affected skin areas with soap and water.
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Any contact lens must be removed. Get medical attention even if the injuries appear to be mild.
First immediately rinse your mouth several times with water. Then administer 2-3 glasses of water for dilution. Do not induce vomiting. Stay calm and seek medical advice.
Immediate Medical Attention
Get medical attention even if the injuries appear to be mild (eyes). In all cases of doubt or if symptoms persist, seek medical attention and show this sheet to the doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Carbon dioxide (CO2).
Not known.
Do not inhale explosion and combustion gases.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Wash with plenty of water.
Related Products
Similar products with comparable safety profiles
HP Color LaserJet CF413A-X-XC-XH-JC Magenta Print Cartridge
---
HP Color LaserJet CF412A-X-XC-XH-JC Yellow Print Cartridge
---
HP Color LaserJet CF383A-AC-AH Magenta Print Cartridge
---
HP Color LaserJet CF411A-X-XC-XH-JC Cyan Print Cartridge
---
COLORMATCH 700 BLACK
---
HP Color LaserJet W2123A-X-XC Magenta Print Cartridge
---
HP Color LaserJet CF503A-X Magenta Print Cartridge
---
HP Color LaserJet CF382A-AC-AH Yellow Print Cartridge
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists.
store at room temperature and protect from frost.
Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical-resistant protective gloves (EN 374). When prolonged or frequently repeated contact may occur, a glove is recommended to prevent contact. Examples of preferred glove barrier materials include: Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride ("PVC" or "vinyl"). As general indication we suggest as suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) and suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness). This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances-mixtures.
Use close fitting safety goggles. (ref. EN 166, EN 140, EN175).
Use adequate protective respiratory equipment. (ref. EN 136, EN 140, EN 141, EN 143, EN 149, EN 405).
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton. (ref. EN 340).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
Stable under normal conditions
Not known.
In industrial use condition the product might release dangerous substances as triethylamine or ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H?
The signal word is warning.
What is the physical form of PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H?
PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H is a liquid with cyan, yellow, magenta, black color. It has characteristic odor.
What is PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H used for?
Water based inks for textiles.
What are the hazard statements for PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of PERACTO JET D Cyan L, M, H, PERACTO JET D Magenta L, M, H, PERACTO JET D Yellow L, M, H, PERACTO JET D Black L, M, H?
The melting point is 0°C and the boiling point is 100 °C.