Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cardice
- Product Form
- solid
- Product Code
- SDS_018S_CLP
- Chemical Name
- Carbon dioxide (solid)
Regulatory Identifiers
- CAS Number
- 000124-38-9 Check regulations →
- EC Number
- 204-696-9 Check regulations →
- REACH No.
- Listed in Annex IV / V REACH, exempted from registration.
Identified Uses
Industrial and professional. Perform risk assessment prior to use.
Manufacturers & Suppliers
Air Liquide UK Ltd.
manufacturer
Station Road, Coleshill, Birmingham B46 1JY, United Kingdom
Emergency Contacts
Air Liquide UK Ltd.
01675 462695
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Contains no other components or impurities which will influence the classification of the product.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon dioxide (solid) EC: 204-696-9 | 124-38-9 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to uncontaminated area wearing self contained breathing apparatus. Keep victim warm and rested. Call a doctor. Apply artificial respiration if breathing stopped.
Symptoms: Loss of mobility/consciousness, asphyxiation, increased respiration and headache (low concentrations).
In case of frostbite spray with water for at least 15 minutes. Apply a sterile dressing. Obtain medical assistance.
Symptoms: Frostbite.
In case of frostbite spray with water for at least 15 minutes. Apply a sterile dressing. Obtain medical assistance.
Symptoms: Frostbite.
Ingestion is not considered a potential route of exposure.
Immediate Medical Attention
Obtain medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All known extinguishants can be used.
Exposure to fire may cause containers to rupture/explode.
Firefighter Protection
In confined space use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Try to stop release. Prevent from entering sewers, basements and workpits, or any place where its accumulation can be dangerous.
Ventilate area.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Contact your gas supplier if in doubt. Refer to supplier's container handling instructions.
Keep container below 50°C in a well ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: Ensure that containers are firmly secured. Ensure cylinder valve is closed and not leaking. Ensure valve outlet cap nut or plug (where provided) is correctly fitted. Ensure valve protection device (where provided) is correctly fitted. Ensure there is adequate ventilation. Compliance with applicable regulations.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ensure all national/local regulations are observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cardice?
The signal word is no signal word.
What is the physical form of Cardice?
Cardice is a gas with colourless. color. It has no odour warning properties. odor.
What is Cardice used for?
Industrial and professional. Perform risk assessment prior to use.
What is the melting point of Cardice?
The melting point is -56.6 °C and the boiling point is -78.5 (s) °C.