Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5
- Product Code
- 1683687
- Synonyms
- PARCO LUBRITE 5
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Weight %* |
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Manganese dihydrogen phosphate | 18718-07-5 | 10 - 30% | Yes |
| Phosphoric acid | 7664-38-2 | 10 - 30% | Yes |
| Manganese nitrate | 10377-66-9 | 5 - 10% | Yes |
| Nickel nitrate | 13138-45-9 | 0.1 - 1% | Yes |
Notes
Non hazardous components Actual concentration or concentration range is withheld as a trade secret
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-MN LT-10 R V MANGANESE PHOSPHATE
---
BONDERITE M-FE 500LT IRON PHOSPHATE known as PRE -N- COTE 500 LT
---
BONDERITE M-PT 25 POST TREATMENT known as PARCOLENE 25
---
BONDERITE M-FE GS 755 IRON PHOSPHATE known as PREP-N-COTE GS 755
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-AD 2 PRETREATMENT ADDITIVE known as PARCO ADDITIVE 2
---
BONDERITE M-ZN 1421-A R ZINC PHOSPHATE
---
BONDERITE C-AK 75 ALKALINE CLEANER known as PARCO CLEANER 75
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. Wash thoroughly after handling. Do not breathe gas/fumes/vapor/spray. Do not mix this product with material which contain AMINES. NITROSAMINE may be formed. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Manufacturer recommends storing above 4.4 °C (40 °F). Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Nitrites may react with organic amines to form nitrosamines which can cause cancer.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. Adding water to this product may cause localized overheating and splattering. Nitrites may react with organic amines to form nitrosamines which can cause cancer.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- Phosphoric acid solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5 known by?
BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5 is also known as: PARCO LUBRITE 5
What is the hazard signal word for BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5?
The signal word is danger.
What is the physical form of BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5?
BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5 is a liquid with green color. It has bland odor.
What is the solubility of BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5?
Complete Water
What is BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5 used for?
Coating
What are the hazard statements for BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5?
This substance has 8 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-MN LUBRITE 5 MANGANESE PHOSPHATE known as PARCO LUBRITE 5?
The melting point is Not available. and the boiling point is > 210 °F (> 98.9 °C).