Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY
- Product Code
- 780769
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc dihydrogen phosphate | 13598-37-3 | 10 - 30% | Yes |
| Phosphoric acid | 7664-38-2 | 10 - 30% | Yes |
| Nickel nitrate | 13138-45-9 | 5 - 10% | Yes |
| Manganese dihydrogen phosphate | 18718-07-5 | 1 - 5% | Yes |
| Sodium nitrate | 7631-99-4 | 1 - 5% | Yes |
| Hydroxylamine sulfate | 10039-54-0 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. Seek immediate medical attention.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Formation of toxic gases is possible during heating or in fires.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 3410 R I ZINC PHOSPHATE known as BONDERITE 3410 REPL I
---
BONDERITE M-ZN 1421-A R ZINC PHOSPHATE
---
BONDERITE M-ZN 1048JJ ZINC PHOSPHATE known as 1048 JJ
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-ZN CD-3042 R ZINC PHOSPHATE known as BONDERITE CD-3042 REPLE NISHER
---
BONDERITE M-ZN 958 R Q3 IBC1709KG ZINC PHOSPHATE
---
BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP
---
BONDERITE M-ZN 181X R Zinc Phosphate IBC1511KG
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing mists or aerosols of this product. Do not take internally. For industrial use only. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Nitrites may react with organic amines to form nitrosamines which can cause cancer.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. Adding water to this product may cause localized overheating and splattering. Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- Phosphoric acid solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY?
BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY is a liquid with green color. It has sour/acid odor.
What is the solubility of BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY?
Complete Water
What is BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY used for?
Conversion coating
What are the hazard statements for BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY?
This substance has 10 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY?
The melting point is Not determined and the boiling point is > 115.6 °C (> 240.1 °F)calculated.