Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EV 3D 23143066 export
- Product Code
- 2047211
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4,4'-Oxydi(benzenesulphonohydrazide) | 80-51-3 | 1 - 5% | Yes |
| Distillates, petroleum, steam-cracked, polymd. | 68131-77-1 | 1 - 5% | Yes |
| Paraffin waxes and Hydrocarbon waxes | 8002-74-2 | 1 - 5% | Yes |
| Siloxanes and Silicones, di-Me, reaction products with silica | 67762-90-7 | 1 - 5% | Yes |
| Vinyl acetate | 108-05-4 | 0.1 - 1% | Yes |
| Tert-butyl perbenzoate | 614-45-9 | 0.1 - 1% | Yes |
| Maleimide resin | 3006-93-7 | 0.1 - 1% | Yes |
Notes
*Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. foam Carbon dioxide. Water
Not available.
None identified.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape or shovel material into recovery container.
Materials: recovery container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use good hygiene practices when handling this material, including changing and laundering work clothes after use. Discard contaminated shoes and leather goods.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat and direct sunlight.
Use good hygiene practices when handling this material, including changing and laundering work clothes after use. Discard contaminated shoes and leather goods.
Keep away from heat
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid dust formation.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EV 3D 23143066 export?
The signal word is warning.
What is the physical form of TEROSON EV 3D 23143066 export?
TEROSON EV 3D 23143066 export is a solid with black color. It has odourless / odorless odor.
What is the solubility of TEROSON EV 3D 23143066 export?
Insoluble
What are the hazard statements for TEROSON EV 3D 23143066 export?
This substance has 1 hazard statement:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of TEROSON EV 3D 23143066 export?
The melting point is 70 °C (158°F) calculated and the boiling point is Not available..