Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 3238 DC-25
- Product Code
- 2366086
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diisononyl phthalate | 28553-12-0 | 30 - 60% | No |
| Calcium carbonate | 471-34-1 | 10 - 30% | No |
| Polyvinyl chloride | 9002-86-2 | 10 - 30% | No |
| Calcium oxide | 1305-78-8 | 1 - 5% | No |
| Hydrocarbons, C11-C12, isoalkanes, < 2% aromatics | 90622-57-4 | 1 - 5% | No |
| Polyamide resin | 68410-23-1 | 0.1 - 1% | No |
IDH number: 2366086 Product name: TEROSON PV 3238 DC-25 <!-- PAGE 2 -->
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Scrape or shovel material into recovery container.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Provide adequate ventilation. Avoid breathing dust. Do not take internally. For industrial use only.
Store between 18.0 °C (64.4 °F) and 23.0 °C (73.4 °F). Keep away from heat and direct sunlight. Keep in a cool, well ventilated area. Store in original container until ready to use. Store in tightly closed containers to prevent moisture contamination.
Wash thoroughly after handling.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids, bases and oxidizing agents. None if used for intended purpose.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 3238 DC-25?
The signal word is danger.
What is the physical form of TEROSON PV 3238 DC-25?
TEROSON PV 3238 DC-25 is a pasty, solid material with white color. It has characteristic odor.
What is TEROSON PV 3238 DC-25 used for?
adhesive and sealant
What are the hazard statements for TEROSON PV 3238 DC-25?
This substance has 3 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
What is the melting point of TEROSON PV 3238 DC-25?
The melting point is < -40 °C and the boiling point is Not applicable, Polymerizes before boiling point is reached..