Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Formaldehyde Load Dye
- Product Code
- F8550G
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General purpose Reagent. For Laboratory Use.
Manufacturers & Suppliers
Life Technologies Corporation
manufacturer
5781 Van Allen Way, PO Box 6482, Carlsbad, CA 92008
+1 760 603 7200
Life Technologies
manufacturer
5250 Mainway Drive, Burlington, ONT, CANADA L7L 6A4
800/263-6236
Emergency Contacts
Emergency Contact
866-536-0631
Emergency Contact
301-431-8585
Emergency Contact
+1-301-431-8585
CHEMTREC Brazil (Rio De Janeiro)
+(55)-2139581449
PT
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Consult a physician if necessary.
Symptoms: May cause respiratory irritation (H335), Harmful if inhaled (H332)
Wash off immediately with plenty of water. In the case of skin irritation or allergic reactions see a physician.
Symptoms: Harmful in contact with skin (H312), Causes skin irritation (H315), May cause an allergic skin reaction (H317)
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician. Call a physician if irritation persists.
Symptoms: Causes serious eye irritation (H319)
Rinse mouth. Consult a physician if necessary. Do not induce vomiting without medical advice.
Symptoms: Harmful if swallowed (H302)
Immediate Medical Attention
Consult a physician if necessary.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Dry chemical. Carbon dioxide (CO2). Water.
Not known
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid exposure to vapor. Avoid breathing vapors or mists. Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Use personal protection equipment.
No special environmental precautions required.
Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Clean contaminated surface thoroughly.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Formaldehyde
---
Formaldehyde solution
CAS: 50-00-0
Formaldehyde 37% solution
CAS: Mixture.
Formaldehyde 37% Solution
---
Formaldehyde solution 37-41%
UFI: F5US-FQ5M-VS2M-YVU4
Formaldehyde-2,4-dinitrophenylhydrazone 1000 µg/mL in Acetonitrile
UFI: UX49-Y0AX-200E-CG2D
Formaldehyde in Methanol
---
Paraformaldehyde
CAS: 30525-89-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. Avoid contact with skin, eyes or clothing. Use only in ventilated areas.
Store locked up. Keep in properly labeled containers. Keep container tightly closed in a dry and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous reaction has not been reported
None under normal processing.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Formaldehyde Load Dye?
The signal word is danger.
What is the physical form of Formaldehyde Load Dye?
Formaldehyde Load Dye is a liquid appearing as no information available . It has mixture has not been tested odor.
What is Formaldehyde Load Dye used for?
General purpose Reagent. For Laboratory Use.
What are the hazard statements for Formaldehyde Load Dye?
This substance has 11 hazard statements:
- H302: Harmful if swallowed
- H312: Harmful in contact with skin
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H332: Harmful if inhaled
- H335: May cause respiratory irritation
- H341: Suspected of causing genetic defects
- H350: May cause cancer
- H360: May damage fertility or the unborn child
- H373: May cause damage to organs through prolonged or repeated exposure
What is the melting point of Formaldehyde Load Dye?
The melting point is No data available and the boiling point is No data available.