Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OXI-KILL
- Product Form
- Mixture
- Product Code
- 1604
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- W3R0-906U-D00G-SHY4
Identified Uses
Main use category: Consumer use, Professional use; Industrial/Professional use spec: Wide dispersive use; Use of the substance/mixture: 55/999 Others; Function or use category: 55/999 Others
Uses advised against
No additional information available
Manufacturers & Suppliers
Bio Services International N.V.
manufacturer
Jagershoek, 13, 8570 Vichte, Belgique-Belgie
00.32.56.77.24.34
http://www.bsi-products.com
Emergency Contacts
B
0032.70.245.245
F
0033.(0)383 22 50 50
Emergency Contact
0033.(0)1.40.05.48.48
N
003130 274 8888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (2-Hydroxyethyl)ammonium mercaptoacetate EC: 204-815-4 | 126-97-6 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: May cause an allergic skin reaction.
Rinse eyes with water as a precaution.
Rinse mouth. Call a poison center or a doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid contact with skin and eyes. Avoid breathing spray. Wear personal protective equipment.
Store in a well-ventilated place. Keep cool.
Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Neoprene gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves Chloroprene rubber, CR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
No respiratory protection needed under normal use conditions
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OXI-KILL?
The signal word is warning.
What is the physical form of OXI-KILL?
OXI-KILL is a liquid with colourless. light pink. color. It has pungent. odor.
What is the solubility of OXI-KILL?
completely soluble.
What is OXI-KILL used for?
Main use category: Consumer use, Professional use; Industrial/Professional use spec: Wide dispersive use; Use of the substance/mixture: 55/999 Others; Function or use category: 55/999 Others
What are the hazard statements for OXI-KILL?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
What is the melting point of OXI-KILL?
The melting point is Not applicable and the boiling point is ≈ 105 °C.