NextSDS Logo
Safety Data Sheet NL

Electrode Cleaning Solution for Skin Grease and Sebum

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Electrode Cleaning Solution for Skin Grease and Sebum
Product Code
HI700621

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Elektrodereinigingsoplossing voor toepassingen met huidvet en talg.

Manufacturers & Suppliers

H

Hanna Instruments S.R.L.

manufacturer

str. Hanna Nr 1, 457260 loc. Nusfalau (Salaj), Romania

+40 260607700

Emergency Contacts

CHEMTREC

+1 7035273887

Emergency Contact

+31 858880596

Antigifcentrum België

+32 070245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Bevat:

Chemical Name CAS Number Concentration Hazardous
AUSILAB 110 --- 5% Yes

Notes

De complete tekst van de gevarenaanduidingen (H) is weergegeven onder hoofdstuk 16 van het blad.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Immediate Medical Attention

Informatie niet beschikbaar

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good ventilation at the workplace must be ensured, with the help of effective local exhaust ventilation. Appropriate technical measures should always take priority over personal protective equipment.

Hands

Protect hands with work gloves category III (ref. standard EN 374). For the final choice of work gloves, compatibility, degradation, breakthrough time, and permeation must be taken into account. In the case of preparations, the resistance of the work gloves must first be checked before use, as this is not predictable. The wear life of the gloves depends on the duration and manner of use.

Eyes

It is recommended to wear hermetically sealed safety goggles (ref. standard EN 166).

Respiratory

If the threshold limit value (e.g., TLV-TWA) of the substance or of one or more substances present in the product is exceeded, it is advisable to use a type B filter mask, choosing the class (1, 2 or 3) based on the concentration limit value (ref. standard EN 14387). In the presence of gases or vapours of different kinds and/or gases or vapours with particles (aerosols, smoke, mist, etc.), combination filters should be used. The use of respiratory protective equipment is necessary when the technical measures applied are not sufficient to limit worker exposure to the relevant threshold values. The protection offered by the masks is limited in any case. If the substance concerned is odourless or its odour threshold is above the corresponding TLV-TWA, and in any case in emergencies, use an independent compressed air breathing apparatus with open circuit (ref. standard EN 137) or a self-priming hose mask (ref. standard EN 138). For the correct choice of respiratory protective equipment, consult standard EN 529.

Skin/Body

Wear long-sleeved work clothing and safety footwear for professional use category I (ref. EEC Directive 89/686 and standard EN ISO 20344).

Environmental

Emissions from production processes, including emissions from ventilation equipment, must be controlled in the context of compliance with environmental protection legislation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
vloeibaar
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
kleurloos
Colour Intensity
---
Form
---
Odor
geurloos
Odor Threshold
Niet beschikbaar
Ph
8,5
Melting Point
Niet beschikbaar
Boiling Point
Niet beschikbaar
Flash Point
Niet van toepassing
Freezing Point
Niet beschikbaar
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Niet beschikbaar
Vapor Pressure
Niet beschikbaar
Vapor Density
Niet beschikbaar
Relative Density
1,00
Bulk Density
---
Density
---
Flammability
Niet beschikbaar
Upper Explosive Limit
Niet beschikbaar
Lower Explosive Limit
Niet beschikbaar
Explosive Limits
---
Auto Ignition Temperature
Niet beschikbaar
Decomposition Temperature
Niet beschikbaar
Solubility
oplosbaar in water
Partition Coefficient
Niet beschikbaar
Solubility In Water
oplosbaar in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
0
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Electrode Cleaning Solution for Skin Grease and Sebum?

The signal word is no signal word.

What is the physical form of Electrode Cleaning Solution for Skin Grease and Sebum?

Electrode Cleaning Solution for Skin Grease and Sebum is a vloeibaar with kleurloos color. It has geurloos odor.

What is the solubility of Electrode Cleaning Solution for Skin Grease and Sebum?

oplosbaar in water

What is Electrode Cleaning Solution for Skin Grease and Sebum used for?

Elektrodereinigingsoplossing voor toepassingen met huidvet en talg.

What is the melting point of Electrode Cleaning Solution for Skin Grease and Sebum?

The melting point is Niet beschikbaar and the boiling point is Niet beschikbaar.