Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit
- Product Code
- 8.00907
Regulatory Identifiers
- CAS Number
- 25952-53-8 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie of voor het jaarlijks volume geen registratie vereist is.
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Millipore
Merck Life Science BV
manufacturer
Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-(3-(Dimethylamino)propyl)-3-ethyl-carbodiimide hydrochloride EC: 247-361-2 | 25952-53-8 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Arts waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Schuim, Kooldioxide (CO2), Droogpoeder
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Brandbaar. Bij brand kunnen vrijkomen: Chloorwaterstofgas stikstofoxiden In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stofontwikkeling en inhalatie van stof(deeltjes) onder alle omstandigheden vermijden. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Voorzichtig opnemen.
Related Products
Similar products with comparable safety profiles
Dicyclohexylamine synthese kwaliteit
CAS: 101-83-7
Cyclohexylamine synthese kwaliteit
CAS: 108-91-8
1-Methyl-2-pyrrolidon synthese kwaliteit
---
Maleïnezuuranhydride synthese kwaliteit
CAS: 108-31-6
Methacrylzuur (gestabiliseerd met hydrochinonmonomethylether) synthese kwaliteit
CAS: 79-41-4
Dimethyl dicarbonaat synthese kwaliteit
CAS: 4525-33-1
Chlooramine T trihydraat synthese kwaliteit
CAS: 7080-50-4
1,2-Propyleen glycol diacetaat synthese kwaliteit
CAS: 623-84-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voor voorzorgsmaatregelen zie hoofdstuk 2.2
Goed afgesloten. Droog. Op een goed geventileerde plaats bewaren. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Materiaal : Nitrilrubber, Doorbraaktijd : 480 min, Handschoendikte : 0,11 mm, Beschermingsindex : Volledig contact, Fabrikant : KCL 741 Dermatril® L. Opmerkingen : Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
nodig indien stofvorming plaatsvindt. Aanbevolen filtertype: Filter type P3. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.
Pas op! Bij aanraking met nitrieten, nitraten, salpererigzuur kunnen mogelijk nitrosaminen (N-nitroseverbindingen) vrijkomen! Heftige reacties mogelijk met: Oxidanten, Zuuranhydriden, zuurhalogeniden, zuren
geen informatie beschikbaar
Geen gegevens beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2811
- Shipping Name
- GIFTIGE ORGANISCHE VASTE STOF, N.E.G. (1-(3-(Dimethylamino)propyl)-3-ethyl-carbodiimide hydrochloride)
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit?
The signal word is danger.
What is the physical form of N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit?
N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit is a vast with lichtgeel color. It has geen gegevens beschikbaar odor.
What is N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit used for?
Synthese chemicalie
What are the hazard statements for N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit?
This substance has 7 hazard statements:
- H302: Schadelijk bij inslikken.
- H311: Giftig bij contact met de huid.
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H373: Kan schade aan organen (Maag, Dikke darm, lymfeknoop) veroorzaken bij langdurige of herhaalde blootstelling bij inslikken.
- H410: Zeer giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of N-(3-Dimethyl|aminopropyl)-|N'-ethylcarbo|dii midehydrochloride synthese kwaliteit?
The melting point is circa 120 °C (1.013 hPa) and the boiling point is Ontleding: ja.