Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ecovio® PS1606
- Synonyms
- polyester, modified
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
for industrial processing only
Uses advised against
Uses other than recommended
Manufacturers & Suppliers
BASF Canada Inc.
manufacturer
5025 Creekbank Road, Building A, Floor 2, Mississauga, ON, L4W 0B6, CANADA
+1 289 360-1300
Emergency Contacts
CHEMTREC
1-800-424-9300
BASF HOTLINE
(800) 454-COPE (2673)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Under the referenced regulation, this product does not contain any components classified for health hazards above the relevant cut off value.
Notes
Under the referenced regulation, this product does not contain any components classified for health hazards above the relevant cut off value.
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
Burns caused by molten material require hospital treatment.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Immediately rinse mouth and then drink 200 - 300 ml water, do not induce vomiting, seek medical attention.
Immediate Medical Attention
Burns caused by molten material require hospital treatment.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, dry powder, carbon dioxide
water jet
carbon monoxide, carbon dioxide, tetrahydrofuran, fumes/smoke, carbon black, harmful vapours. Formation of further decomposition and oxidation products depends upon the fire conditions. Under special fire conditions traces of other toxic substances are possible.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation.
Sweep/shovel up.
Sweep/shovel up.
No special precautions necessary.
Sweep/shovel up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid the formation and deposition of dust.
Keep container tightly closed and dry; store in a cool place. Avoid direct sunlight. Protect against moisture. Avoid extreme heat.
Handle in accordance with good industrial hygiene and safety practice.
Avoid all sources of ignition: heat, sparks, open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide exhaust ventilation at sources when processing molten product. Provide local exhaust ventilation to control dusts/vapours.
Chemical resistant protective gloves, Wear gloves to prevent contact during mechanical processing and/or hot melt conditions., Protective glove selection must be based on the user's assessment of the workplace hazards.
Safety glasses with side-shields.
Wear respiratory protection if ventilation is inadequate. Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator as needed.
Standard work clothes and shoes., Body protection must be chosen based on level of activity and exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable. Peroxides: The product does not contain peroxides. The product/the substance has not a tendency towards the formation of peroxide.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal. Oxidizing properties: not fire-propagating
The product is chemically stable. No hazardous reactions if stored and handled as prescribed/indicated.
Avoid extreme heat. Avoid all sources of ignition: heat, sparks, open flame.
strong oxidizing agents, chlorinated hydrocarbons, aromatic solvents
At prolonged and/or strong thermal stressing above the decomposition temperature dangerous decomposition products can be formed. Thermal decomposition: > 280 °C
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate or dispose of in a licensed facility.
Incinerate or dispose of in a licensed facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
NFPA Hazard codes: Health: 1, Fire: 1, Reactivity: 0, Special: null
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is ecovio® PS1606 known by?
ecovio® PS1606 is also known as: polyester, modified
What is the hazard signal word for ecovio® PS1606?
The signal word is no signal word.
What is the physical form of ecovio® PS1606?
ecovio® PS1606 is a pellets appearing as pellets with natural color. It has sweetish odor.
What is the solubility of ecovio® PS1606?
not soluble
What is ecovio® PS1606 used for?
for industrial processing only
What are the hazard statements for ecovio® PS1606?
This substance has 1 hazard statement:
- The product does not require a hazard warning label in accordance with GHS criteria.
What is the melting point of ecovio® PS1606?
The melting point is 100 - 120 °C and the boiling point is The substance / product decomposes therefore not determined..