AlcoTec ALMIGWELD

Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician immediately.

Wash thoroughly with soap and water. Consult a physician if irritation persists.

Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician.

Use with adequate explosion-proof ventilation to meet the limits listed in Section 2. Welding or cutting operations involving beryllium-containing base or filler metals shall be done using local exhaust ventilation unless atmospheric tests under the most adverse conditions have established that the workers' exposures is within the acceptable concentrations defined by 29 CFR 1910.1000. In all cases, workers in the immediate vicinity of the welding or cutting operations shall be protected as necessary by local exhaust ventilation.

Wear impervious gloves to avoid any skin injury.

Welders should use appropriate equipment (e.g. welder's helmet, face shield, filter lens) to prevent eye irritation or flash burns.

Use NIOSH-approved respiratory protection [dust, fume, high efficiency dust/fume mask for lead, or other (organic vapor)] as specified by an Industrial Hygienist or other qualified professional if concentrations exceed the limits listed in Section 2. Airline respirators are required for welding or cutting operations involving beryllium-containing base or filler metals unless atmospheric tests under the most adverse conditions have established that the workers' exposures is within the acceptable concentrations defined by 29 CFR 1910.1000. In all cases, workers in the immediate vicinity of the welding or cutting operations shall be protected as necessary by airline respirators.

Wear impervious gloves to avoid any skin injury. Where employees are exposed to beryllium above the PEL or where excessive contamination of clothing with beryllium is possible, adequate protective clothing should be provided to prevent contamination of personal clothing.