Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Anti-Bakterien-Diesel-Additiv
- Synonyms
- Anti-bacterial Diesel additive
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocide
Uses advised against
No information available at present.
Manufacturers & Suppliers
LIQUI MOLY GmbH
manufacturer
Jerg-Wieland-Str. 4, 89081 Ulm-Lehr
(+49) 0731-1420-0
Emergency Contacts
Landspitali- The National University Hospital of Iceland
+354 543 2222
Landspitali- The National University Hospital of Iceland
112
LIQUI MOLY GmbH (LMR)
+49 (0) 700 / 24 112 112
LIQUI MOLY GmbH (LMR)
+1 872 5888271
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS05
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 918-481-9 | --- | 40 - 50% | Yes |
| 2-ethylhexyl nitrate EC: 248-363-6 | 27247-96-7 | 25 - 30% | Yes |
| Methyl salicylate EC: 204-317-7 | 119-36-8 | 10 - 20% | Yes |
| Ethanediol EC: 203-473-3 | 107-21-1 | 1 - 5% | Yes |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 1 - 5% | Yes |
| 2-Ethylhexanol EC: 203-234-3 | 104-76-7 | 1 - 5% | Yes |
| Alcohols, C16-18 and C18-unsatd., ethoxylated | 68920-66-1 | 1 - 5% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms.
Remove polluted, soaked clothing immediately, wash thoroughly with plenty of water and soap, in case of irritation of the skin (flare), consult a doctor.
Symptoms: irritation of the skin (flare)
Remove contact lenses. Wash thoroughly for several minutes using copious water - call doctor immediately, have Data Sheet available. Protect uninjured eye. Follow-up examination by an ophthalmologist.
Rinse the mouth thoroughly with water. Do not induce vomiting. Consult doctor immediately. Danger of aspiration. In case of vomiting, keep head low so that the stomach content does not reach the lungs.
Symptoms: Nausea, Vomiting, Danger of aspiration, Oedema of the lungs, Chemical pneumonitis (condition similar to pneumonia)
Immediate Medical Attention
Immediate medical attention required for eye contact (call doctor immediately) and ingestion (consult doctor immediately). Gastric lavage (stomach washing) only under endotracheal intubation. Subsequent observation for pneumonia and pulmonary oedema.
Medical Treatment
Gastric lavage (stomach washing) only under endotracheal intubation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction. If this is insufficient to maintain the concentration under the WEL or AGW values, suitable breathing protection should be worn. Applies only if maximum permissible exposure values are listed here. Suitable assessment methods for reviewing the effectiveness of protection measures adopted include metrological and non-metrological investigative techniques. These are specified by e.g. EN 14042. EN 14042 "Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents".
Chemical resistant protective gloves (EN ISO 374). If applicable Protective Neoprene / polychloroprene gloves (EN ISO 374). Protective nitrile gloves (EN ISO 374). Protective gloves made of fluorocarbon rubber (EN ISO 374). Minimum layer thickness in mm: 0,5 Permeation time (penetration time) in minutes: - 480 The breakthrough times determined in accordance with EN 16523-1 were not obtained under practical conditions. The recommended maximum wearing time is 50% of breakthrough time. Protective hand cream recommended.
Tight fitting protective goggles with side protection (EN 166).
If OES or MEL is exceeded. Filter A P2 (EN 14387), code colour brown, white Observe wearing time limitations for respiratory protection equipment.
Protective working garments (e.g. safety shoes EN ISO 20345, long-sleeved protective working garments).
No information available at present.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-ETHYLHEXYL NITRATE, 1,2-BENZISOTHIAZOL-3(2H)-ONE)
- Transport Class
- 9
- Packing Group
- III
Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.
Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.
Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Anti-Bakterien-Diesel-Additiv known by?
Anti-Bakterien-Diesel-Additiv is also known as: Anti-bacterial Diesel additive
What is the hazard signal word for Anti-Bakterien-Diesel-Additiv?
The signal word is danger.
What is the physical form of Anti-Bakterien-Diesel-Additiv?
Anti-Bakterien-Diesel-Additiv is a liquid with brown color. It has characteristic odor.
What is the solubility of Anti-Bakterien-Diesel-Additiv?
Insoluble
What is Anti-Bakterien-Diesel-Additiv used for?
Biocide
What are the hazard statements for Anti-Bakterien-Diesel-Additiv?
This substance has 8 hazard statements:
- H302: Harmful if swallowed.
- H304: May be fatal if swallowed and enters airways.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H332: Harmful if inhaled.
- H361: Suspected of damaging the unborn child.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Anti-Bakterien-Diesel-Additiv?
The melting point is There is no information available on this parameter. and the boiling point is There is no information available on this parameter..